Setup Field(S) - Motorola LS3408-FZ20005 Product Reference Manual

Setup Field(s)

Setup Field(s) Definitions
Table 14-1
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a
Character
Move Cursor Past a Specific
String
Move Cursor to Specific String
and Replace
Move Cursor to Last
Occurrence of String and
Replace All
Skip to End
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Scan the Move Cursor To Character, then any printable ASCII
character from the Alphanumeric Keyboard on page
moves the cursor to the position after the matching character. If the
character is not there, the rule fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is 'A', the
cursor moves past 'A', 'AA', 'AAA', etc. Scan the
Character, then select a character from the
the character is not there, the cursor does not move (i.e., has no effect).
This action moves the cursor past the first occurrence of a selected
string. Scan Move Cursor Past Specific
character(s) (up to 10) using the
End of Message bar code on page
This action moves the cursor to the first occurrence of a selected string
and replaces the string with another user-defined string. Scan
Cursor to Specific String and
string representing the character(s) (up to 10) to match and delete using
the Alphanumeric Keyboard. Scan the
page 14-106. Enter another alphanumeric string representing the
character(s) (up to 10) to insert using the
Scan End of Message.
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan Move Cursor to Last Occurrence of String and
Replace All, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Keyboard. Scan the End of
string representing the character(s) (up to 10) to insert using the
Alphanumeric Keyboard. Scan
Scan Skip to End to move the cursor to the end of the data.
Scan one of these bar codes to select the desired number of positions
to move the cursor ahead.
Scan one of these bar codes to select the desired number of positions
to move the cursor back.
Send prefix and/or suffix value by scanning the appropriate bar code.
Set these values using the Scan Prefix and Scan Suffix bar codes on
page 13-4.
Advanced Data Formatting
Description
14-95. This
Move Cursor Past
Alphanumeric
String, then select the
Alphanumeric Keyboard. Scan the
14-106.
Replace, then enter an alphanumeric
End of Message bar code on
Alphanumeric
Alphanumeric
Message. Enter another alphanumeric
End of Message.
14 - 27
Page
14-28
14-28
14-28
Keyboard. If
14-28
14-28
Move
Keyboard.
14-29
14-29
14-30
14-32
14-33