Table of Contents
Advertisement
I
NSTALLATION
RS485 or OCIA
1.
Turn off the host device.
2.
Plug the male 10-pin RJ45
end of the MVC cable into the
10-pin socket on the MS3780.
3.
For RS485:
Connect the other end of the
MVC cable to Port 9 of the
host device.
For OCIA:
Connect the other end of the
MVC cable to the appropriate
communication port on the host
device.
4.
Turn on the host device.
When the scanner first receives power the white LED will flash, one
blue LED will turn on and the scanner will emit one beep.
Plugging the scanner into the serial port of the PC does not guarantee
that scanned information will appear at the PC. A software driver and
correct configuration setting are also required for proper
communication to occur.
See Caution statement on page 5.
Applicable for IBM
8
®
Host applications.
Figure 8. RS485 (above), OCIA (below)
Advertisement
Table of Contents
