Rs485 - Metrologic MK9520-37A38 Installation And User Manual

I
NSTALLING THE

RS485

1. Turn off the host system.
2. Plug the male 10-pin RJ45 end of the
MVC cable into the 10-pin socket on
the scanner. You will hear a 'click'
when the connection is made.
3. Connect the other end of the MVC
cable to the host device.
4. Turn on the host system.
Plugging the scanner into a port on the host system does not guarantee
that scanned information will be communicated properly to the host
system. Please refer to the MetroSelect Single-Line Configuration
Guide or MetroSet2's help files for instructions on changing the
scanner's factory default configuration. The scanner and host system
must use the same communication protocols.
See caution on page 6.
Applicable for IBM
8
S
CANNER TO THE
®
host applications.
H S
OST YSTEM
Figure 7.