Fagor 2F2611 User's Installation And Operation Manual page 5

2
CONNECTION TO THE WATER MAINSLEVELATION
You will find the water-
input pipe inside the
drum:
a Connect the bent
end of the pipe at
the screw entrance
of the electrically
operated valve situa-
ted at the back of
the machine.
b Connect the other
end of the tube to
the water supply.
Tighten the connec-
tion nut well.
We recommend you
have a fixed drainage
exit at a distance of bet-
ween 50 and 70 cm
from the floor.
Ensure that the drainage
pipe is not too tight and
that there are no folds or
bottlenecks.
IMPORTANT
It is important that the elbow of the pipe is properly fixed at the exit so that it doesn't fall,
with the consequent risk of flooding.
If your washing machine has an input for hot water, connect the tube with the red threa-
ding to the hot water tap and to the electrically operated valve with the red filter.
The washing machine is to be connected to the water supply network using the new supply
pipes provided with the appliance. The old water supply pipes are not to be used.
For correct functioning of the washing machine, the water network pressure must be bet-
ween 0.05 and 1 MPa (0.5 - 10 Kgrf/cm
3
LEVELLING
Level the washing
machine by using the
adjustable feet. This will
reduce the noise level
and ensure that the
machine will not move
when in operation.
max.
70 cm
min.
50 cm
2 ).
English
a
b
53