Fagor 2F2611 User's Installation And Operation Manual page 19

5
COMMISSIONING
In order to switch on
the washing machine,
press the on/off button.
The display situated over
the button will light up
and the washing machine
will start the selected pro-
gramme with the options.
If your washing machi-
ne has a display, you
will be able to see how
many minutes are left
until the end of the wash.
Switching on
the delay
This consists of pressing
the on/off button after
selecting the programme,
the wash options and the
delay time.
On washing machines
with a display, the screen
will flash showing the
time left before the pro-
gramme starts. When the
delay time has elapsed, it
will stop flashing and
show the duration of the
6
STAGES IN WASH PROGRAMME
The active phases at
each point of the pro-
gramme shall appear
as the programme pro-
gresses.
Any option button may
be selected as long as
the phase in the pro-
gramme in which it
takes effect has not
ended and as long as
the programme allows
this option.
Pressing the delay but-
programme selected.
On washing machines with
indicator lights, when the
On/Off button is pressed,
the time indicator will flash,
successively showing the
time remaining for the
wash programme to begin.
ton during the wash has
no effect on the washing
IMPORTANT
If you use the selec-
tor to change pro-
grammes while the
machine is working, it
will enter the PAUSE
mode. The on/off light
will go off and the
programme will be
annulled.
Operating Pilot Light
IMPORTANT
If you need to add or
remove a garment, select
pause and ensure that the
water level is not over the
door and that the inside
temperature is not high. f
you press the ON button,
the wash will recommence
at the same stage of the
cycle where it stopped.
machine.
If you press the On/ Off
button during the wash,
the washing machine will
enter the PAUSE mode
and this button's light will
turn off.
Pre-wash
Wash
Rinse
End
English
67