Safety Instructions (Rugged) - Pepperl+Fuchs ecom Pad-Ex 01 DZ2 User Manual

Safety Instructions (rugged)

These safety instructions should always be observed to ensure safe operation
Safety Instructions (rugged)
when handling the device.
 Do not place this device on an unstable table or surface. The device may fall,
These safety instructions should always be observed to ensure safe operation
causing serious damage to its housing and components.
when handling the device.
 Do not cover the device, or block the air ventilation holes of the device with
 Do not place this device on an unstable table or surface. The device may fall,
any other objects.
causing serious damage to its housing and components.
 Do not use any sharp object to tap on the display screen. CAUTION FOR ADAPTER
 Do not cover the device, or block the air ventilation holes of the device with
THE TABLET PC IS FOR USE WITH DEDICATED AC ADAPTER.
 Do not expose the device to direct sunlight and dusty environments.
any other objects.
 Keep the device away from excessive heat and humidity.
BATTERY SAFETY
 Do not use any sharp object to tap on the display screen.
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
 Keep liquids away from the device.
 Do not expose the device to direct sunlight and dusty environments.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE
 Keep the device away from any magnetic emitting devices as this may affect
MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE
 Keep the device away from excessive heat and humidity.
the quality of the wireless signal reception.
MANUFACTURER'S INSTRUCTIONS.
 Keep liquids away from the device.
 When using an AC adapter:
CAUTION FOR RJ-45
 Keep the device away from any magnetic emitting devices as this may affect
 Place this device in a location that is close enough to an electrical
The RJ-45 jack is not used for telephone line connection.
the quality of the wireless signal reception.
outlet to accommodate the length of the power cord.
 When using an AC adapter:
 Operate this device only with the type of power source indicated on the
Relevant information for Ex-protection
 Place this device in a location that is close enough to an electrical
device marking label.
outlet to accommodate the length of the power cord.
Faults and damage
 Disconnect the AC adapter from the electrical outlet if the device is not
 Operate this device only with the type of power source indicated on the
being used for an extended period of time.
device marking label.
If there is any reason to suspect that the safety of the unit has been impaired,
 When cleaning the device,
it must be withdrawn from use and removed immediately from the Ex-area.
 Disconnect the AC adapter from the electrical outlet if the device is not
ü Be sure to turn off the device properly and unplug the AC adapter
Measures must be taken to prevent it from being restarted accidentally.
being used for an extended period of time.
before cleaning.
We recommend that the unit is returned to the manufacturer for inspection.
 When cleaning the device,
ü Do not use abrasive cleaners to clean the device.
ü Be sure to turn off the device properly and unplug the AC adapter
 Do not attempt to disassemble or repair this device. Doing so will void
The safety of the unit may be compromised, if, for example:
before cleaning.
the warranty.
ü Do not use abrasive cleaners to clean the device.
- there is visible damage to the housing.
 Do not attempt to disassemble or repair this device. Doing so will void
- the unit has been subjected to excessive loads.
the warranty.
- the unit has been improperly stored.
- the unit has been damaged in transit.
- unit markings or inscriptions are illegible.
- malfunctions occur.
- permitted limit values have been exceeded.
EN-51
EN-47
Appendix
Appendix
Appendix