INTRODUCTION: SAFETY PRECAUTIONS: Aseptico’s ADC-01CS Command Air Dental Chair is Aseptico accepts no liability for direct or consequential injury intended to provide patient seating for field dentistry and or damage resulting from improper use, arising in particular medical treatment. The chair is fully adjustable from...
CHAIR SET-UP: 1. Remove the chair from its carrying Adjustment case and set it on the floor, legs Pins down, in its folded position. 2. Rotate the chair up onto one side and remove the leg adjustment pins from their storage pouch underneath the chair seat.
CHAIR ADJUSTMENTS: 1. Seat Height- The ADC-01 chair seat height can be set at any of the five preset settings. Without a patient in the chair, put your toe on one of the front chair legs and lift up slightly on the chair seat.
COLLAPSING THE CHAIR: CAUTION NEVER FORCE THE CHAIR INTO THE COLLAPSED POSITION. FORCING THE CHAIR DOWN WITHOUT RELEASING THE BACKREST ADJUSTMENT LEVER MAY BEND THE ADJUST- MENT ASSEMBLY AND WILL VOID THE WARRANTY. 1. Fold toe and then leg sections onto seat as it was originally stored. 2.
SYMBOL DEFINITIONS: Part Number Serial Number UDI: Unique Device Identifier MD - Medical Device Authorized European Representative Dental Use Only Authorized United Kingdom Representative Page 7...
(90) days from the date of return to Aseptico, whichever is later. This limited warranty applies only to the initial or first installation of the product or part.
Need help?
Do you have a question about the Command Air ADC-01CS and is the answer not in the manual?
Questions and answers