power source and/or battery pack, picking up or GENERAL POWER TOOL SAFETY carrying the tool. WARNINGS Carrying power tools with your fi nger on the switch or energising power tools that have the switch on WARNING invites accidents. Read all safety warnings and all instructions. d) Remove any adjusting key or wrench before Failure to follow the warnings and instructions may result in turning the power tool on.
c) When battery pack is not in use, keep it away 10. Do not touch the bit during or immediately after from other metal objects, like paper clips, coins, operation. The bit becomes very hot during operation keys, nails, screws or other small metal objects, and could cause serious burns.
WARNING CAUTION ON LITHIUM-ION BATTERY If a conductive foreign matter enters in the terminal of lithium ion battery, the battery may be shorted, causing fi re. When To extend the lifetime, the lithium-ion battery equips with the storing the lithium ion battery, obey surely the rules of protection function to stop the output.
APPLICATIONS Wood Wood screw Rotation and hammering function ○ Drilling anchor holes Hammering only function ○ Drilling holes in concrete ○ Drilling holes in tile Rotation only function Rotation only function (without dust extraction unit) ○ Drilling in steel or wood (with optional accessories) Rotation and hammering function ○...
Page 6
● About the Battery Capacity Lamp Table 2 The charge capacity of a battery that is charging can be State of lamp Battery capacity checked using the battery capacity indicator lamp. The lamp’s indications for the battery capacity are as Battery capacity at less than 25% Blinks shown in Table 2.
MOUNTING AND OPERATION Action Figure Page Removing and inserting the battery Charging Remaining battery indicator Installing / Removing the side handle Inserting SDS-plus drilling tools Removing SDS-plus drilling tools Fig. 17 Selecting rotation direction LUBRICATION Selecting the operating mode Adjusting the drilling depth Low viscosity grease is applied to this rotary hammer so Changing the chisel position that it can be used for a long period without replacing the...
Page 8
NOTE Storing lithium-ion batteries. Make sure the lithium-ion batteries have been fully charged before storing them. Prolonged storage (3 months or more) of batteries with a low charge may result in performance deterioration, signifi cantly reducing battery usage time or rendering the batteries incapable of holding a charge.
Page 9
DH36DBL DH36DBQL DH36DBML* 36 V 0 – 1100 /min 0 – 4300 /min 28 mm 20mm φ max 13 mm – φ max 32 mm – φ max 4.8 kg 5.0 kg 6.8 kg * Specifi cations are for when a dust extraction unit has been installed. When used with the dust extraction unit uninstalled, the specifi...
Need help?
Do you have a question about the DH 36DBQL and is the answer not in the manual?
Questions and answers