Clarke CPPAZ Instruction Manual

Lever action drum pump

Download this manual

LEVER ACTION DRUM PUMP

INTRODUCTION

Thank you for purchasing this CLARKE drum pump,

Suitable for petroleum based and high viscosity fluids, such as diesel, paraffin, transmission fluid, machine oil, lubricating

oil, fuel oil, anti-freeze, etc

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

WARNING: THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT. THIS PRODUCT IS NOT

SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION OR AQUEOUS FLUIDS.

ASSEMBLY

FITTING THE PUMP TO A BARREL

1. Adjust the telescopic extension tube to the required length.

• The bottom of the telescopic extension tube should be just off of the bottom of the barrel/drum when

fitted.

2. Screw the pump into the threaded opening of the barrel/drum.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

FITTING THE REQUIRED OUTLET TUBE

FITTING THE TELESCOPIC INLET TUBE

MODEL NO: CPPAZ

PART NO:

PART NO: 6499650

Need help?

Do you have a question about the CPPAZ and is the answer not in the manual?

Page 1 PART NO: 6499650 LEVER ACTION DRUM PUMP INTRODUCTION Thank you for purchasing this CLARKE drum pump, Suitable for petroleum based and high viscosity fluids, such as diesel, paraffin, transmission fluid, machine oil, lubricating oil, fuel oil, anti-freeze, etc Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.
Page 2 SAFETY To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions. 1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or death.

6499650