Introduction; Purpose Of This Manual; Important; Installation - Electrolux AEG ENV06 Service Manual

1 INTRODUCTION

1.1 Purpose of this Manual

The purpose of this Service Manual is to provide service engineers who already have the basic knowledge ne-
cessary to repair dryers with information concerning condenser dryers with electronic control systems.
The electronic control consists of a main board having an integrated selector and on some models a LCD dis-
play, supplied already mounted and tested by the building factory.
This Service Manual describes the following aspects:
• General characteristics.
• Control panel and drying programmes.
• Description of operation.
• Drying circuit.
• Electrical components.
• Diagnostics guide.
• Accessibility.

1.2 Important

1.3 Installation

- The appliance must be installed on a perfectly level surface in order to ensure that the condensed water
flows correctly into the tank.
- The feet must NOT be removed. The gap between the bottom of the dryer and the floor is essential to pre-
vent overheating.
- ADL
- Repairs to electrical appliances must be carried out only by qualified service
engineers
- Before touching internal components, always remove the plug from the power
socket.
5/62 599 71 49 26