Utility Screen; Ctrl Key Asgn. Page - Yamaha AW4416 Manual Supplement

UTILITY screen

Assign functions to the [CTRL] key + function keys
Function
Select the function that will be exe-
cuted when you hold down the [CTRL]
key (right [SHIFT] key) and press an
[F1]–[F5] key.
Key operation
• [UTILITY] key [F5] (CTRL
KeyAsgn.) key
• Repeatedly press the [UTILITY] key
until the screen shown at right
appears
Mouse operation
M button UTIL button
KeyAsgn. tab
Screen functions
A
CTRL+F1–CTRL+F5
This area displays the currently-assigned function
for each combination of CTRL key + [F1] key –
CTRL key +[F5] key. When you move the cursor to
the desired combination and press the [ENTER]
key, the graphic displaying the corresponding
[CTRL] key and [F1]–[F5] key combination will be
highlighted, selecting it as the destination for func-
tion assignment.
Display
NO ASSIGN
SHUT DOWN
SONG SAVE
CD LOAD
CD UNLOAD
AUTOMIX [Enable/Disable]
MTC SYNC [Master/Slave]
REMOTE LAYER
TC DISPLAY
SCENE RECALL No##
DELAY [ON/OFF]
EQ [ON/OFF]
DYN [ON/OFF]
PEAK HOLD [ON/OFF]
OSCILLATOR [ON/OFF]
* unctions marked by an asterisk may not be executable depending on the operating state of the AW4416 (for example
when the transport is running). In this case, an error message will appear at the bottom of the display.

CTRL Key Asgn. page

2
3
CTRL
No function assigned
Display the SONG screen/Shut Down screen (shortcut to shutdown) (*)
Display the SONG screen/Song List page, and move the cursor to the SAVE button
(shortcut to save the current song) (*)
Close the tray of the CD-RW drive, and load the CD (*)
Open the tray of the CD-RW drive (*)
Turn automix on (Enable) or off (Disable) (*)
Switch the AW4416 between MTC master (Master) and MTC slave (Slave) (*)
Switch the mixing layer to Remote
Switch the time counter display method between "SEC"
Recall the desired scene number xx (use the [DATA/JOG] dial to select xx)
Switch the delay on/off for the currently selected channel
Switch the EQ on/off for the currently selected channel
Switch the dynamics processor on/off for the selected channel
Switch peak hold on/off
Switch the test tone oscillator on/off
Version 2.0 Manual Supplement
1
B
Function list
In this area you can specify the function to be
assigned to the key combination selected in 1.
The row enclosed by the dotted frame indicates
the currently selected function. The following
functions can be assigned.
Function
"TC"
4
5
"MES"
25