Yamaha AW4416 Manual Supplement page 29

Parameter 1 Parameter 2 Parameter 3
ON/OFF
Q LOW
F LOW
G LOW
Q L-MID
F L-MID
G L-MID
Q H-MID
EQ
F H-MID
G H-MID
Q HIGH
F HIGH
G HIGH
ATT.
Parameter 1 Parameter 2 Parameter 3
ON/OFF
THRESHOLD
ATTACK
GAIN/RANGE
RELEASE/HLD H
DYNAMICS
RELEASE/HLD L
RAT/DEC H
K/DEC L/WIDTH
Parameter 1 Parameter 2 Parameter 3
EFFECT1 H
EFFECT1 L
EFFECT
EFFECT1
EFFECT2 H
EFFECT2 L
EFFECT2
Parameter 1 Parameter 2 Parameter 3
PAN
CHANNEL
BALANCE
Control the channel EQ and attenuation. Use parameter 2 to select the
type of parameter that you want to control, and use parameter 3 to
specify the desired channel.
EQ on/off
Q of the LOW band EQ
F (frequency) of the LOW band EQ
G (gain) of the LOW band EQ
Q of the L-MID band EQ
F (frequency) of the L-MID band EQ
G (gain) of the L-MID band EQ
Q of the H-MID band EQ
F (frequency) of the H-MID band EQ
G (gain) of the H-MID band EQ
Q of the HIGH band EQ
F (frequency) of the HIGH band EQ
G (gain) of the HIGH band EQ
Attenuation
INPUT 1–24 Input channel 1–24
MONI 1–16 Monitor channel 1–16
RETURN 1/2 Return channel 1/2
ST OUT Stereo output channel
Control the dynamics processor of a channel. Parameter 2 selects the
dynamics processor parameter that will be controlled, and parameter 3
selects the channel.
Dynamics processor on/off
THRESHOLD
ATTACK
GAIN or RANGE
RELEASE ... (1) or HOLD H
RELEASE ... (1) or HOLD L
RATIO, or DECAY ... (1)
RATIO, DELAY ...(2), or WIDTH
INPUT 1–24 Input channel 1–24
MONI 1–16 Monitor channel 1–16
RETURN 1/2 Return channel 1/2
ST OUT Stereo output channel
Control the parameters of internal effect 1/2. Use parameter 2 to select
effect 1 or 2, and use parameter 3 to select the desired effect parameter.
PARAM 1–15 Parameter number 1–15 for internal effect 1 ... (1)
PARAM 1–15 Parameter number 1–15 for internal effect 1 ... (2)
MIX BAL MIX BAL parameter of internal effect 1
PARAM 1–15 Parameter number 1–15 for internal effect 2 ... (1)
PARAM 1–15 Parameter number 1–15 for internal effect 2 ... (2)
MIX BAL MIX BAL parameter of internal effect 2
Control the channel pan (or balance). Use parameters 2 and 3 to specify
the desired channel.
INPUT 1–24 Input channel 1–24
MONI 1–16 Monitor channel 1–16
RETURN1 L/R Return channel 1
RETURN2 L/R Return channel 2
ST OUT Balance of the stereo output channel
Version 2.0 Manual Supplement
Content
Content
Content
Content
29