Page 2
Important Safety Instructions • Read these instructions. WARNING: • Keep these instructions. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, • Heed all warnings. DO NOT EXPOSE THIS APPARATUS TO RAIN OR • Follow all instructions. MOISTURE. THE APPARATUS SHALL NOT BE EXPOSED •...
Page 3
Crestron, the Crestron logo, Crestron e-Control, Crestron Studio, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.
4K DigitalMedia 8G+ Receiver 100 4K DigitalMedia 8G+ Receiver & Room Controller 100: DM-RMC-4K-100-C Introduction The DM-RMC-4K-100-C provides a simple 1-box interface solution for a single ® display device as part of a complete Crestron DigitalMedia™ system. It functions ®...
Page 8
DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. Via its DM 8G+ input, the DM-RMC-4K-100-C can be connected directly to an HDBaseT compliant source without requiring a DM transmitter. HDBaseT connectivity through the...
Page 9
4K DigitalMedia 8G+ Receiver 100 Multimedia Display Interface A single HDMI digital AV output port is provided on the DM-RMC-4K-100-C for connection to a display or other device. The HDMI output can also handle DVI signals using an appropriate adapter or interface cable.
Applications The diagram below shows a DM-RMC-4K-100-C in a standalone application. In this application, the DM-RMC-4K-100-C is used with a DM 8G+ transmitter such as the DM-TX-201-C (sold separately) and is not used with a DM switcher. DM-RMC-4K-100-C in a Standalone Application 4 •...
Crestron DM-RMC-4K-100-C 4K DigitalMedia 8G+ Receiver 100 Specifications Specifications for the DM-RMC-4K-100-C are listed in the following table. DM-RMC-4K-100-C Specifications SPECIFICATION DETAILS Video Input Signal Types DM 8G+ (DigitalMedia over one CAT5e twisted pair copper wire), HDBaseT Output Signal Types...
Page 12
Metal, black finish, with two integral mounting flanges, vented top and bottom Mounting Freestanding, surface mount, or attach to a single rack rail (Continued on following page) 6 • 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C Operations & Installation Guide – DOC. 7522C...
Page 13
5. References to the IEEE 802.3af and 802.3at standards are used to demonstrate that PoDM and PoH technology is similar in function to PoE and follows the same essential specifications. The DM-RMC-4K-100-C cannot be powered over Ethernet, and its DM IN port should not be connected directly to an Ethernet network or device.
This section provides information on the connections, controls, and indicators available on the DM-RMC-4K-100-C. DM-RMC-4K-100-C Physical View (Front) DM-RMC-4K-100-C Physical Views (Left and Right Side) 8 • 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C Operations & Installation Guide – DOC. 7522C...
Page 16
4K DigitalMedia 8G+ Receiver 100 Crestron DM-RMC-4K-100-C DM-RMC-4K-100-C Overall Dimensions (Left and Right Side Views) 6.09 in 4.97 5.12 in (155 mm) (127 mm) (130 mm) Connectors, Controls, and Indicators CONNECTORS, DESCRIPTION CONTROLS, AND INDICATORS HDMI OUT LED (1) Green LED, indicates video signal...
Page 17
CBL-HD-DVI interface cables are sold separately. 3. Maximum string length for serial commands sent via the IR port should be no greater than 40 characters. Operations & Installation Guide – DOC. 7522C 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C • 11...
Page 18
1080p. For complete system design guidelines, refer to the DigitalMedia Design Guide (Doc. 4546). DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately. 12 • 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C Operations & Installation Guide – DOC. 7522C...
4096 x 2160 4K DCI The DM-RMC-4K-100-C also uses high-speed Ethernet for communications between the device and a control system, computer, media server, and other IP-based devices. For general information on connecting Ethernet devices in a Crestron system, refer to the Crestron e-Control Reference Guide (Doc.
Mounting on a Flat Surface To mount the DM-RMC-4K-100-C on a flat surface such as a wall or ceiling, use four mounting screws (not included). The following illustration shows mounting of the DM-RMC-4K-100-C on a wall.
Page 21
Mounting DM-RMC-4K-100-C on a Wall Mounting Screws (4) (Not Included) To mount the DM-RMC-4K-100-C on the left or right rail of a rack, use two rack Rack Mounting mounting screws (not included). The following illustration shows mounting of the DM-RMC-4K-100-C on the right rail of a rack.
4K DigitalMedia 8G+ Receiver 100 Crestron DM-RMC-4K-100-C Mounting DM-RMC-4K-100-C on Rack Rail (Right Rack Rail Shown) Rack Mounting Screws (Not Included) Hardware Hookup Make the necessary connections as called out in the following illustrations. Refer to “Network Wiring” on page 13. Apply power after all connections have been made.
Page 23
HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. NOTE: The 24 Vdc power pack (included) is not required if Power over DM or Power over HDBaseT is used. Operations & Installation Guide – DOC. 7522C 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C • 17...
In addition, the IP table of the device can be configured. NOTE: Crestron software and any files on the website are for authorized Crestron dealers and Crestron Service Providers (CSPs) only. New users must register to obtain access to certain areas of the site (including the FTP site).
Firmware Check the Crestron website to find the latest firmware. (New users may be required to register to obtain access to certain areas of the site, including the FTP site.) To upgrade DM-RMC-4K-100-C firmware, do the following:...
Crestron Toolbox to create the IP table entry of the DM-RMC-4K-100-C. NOTE: If the DM-RMC-4K-100-C is connected to a DM switcher, the IP table entry of the DM-RMC-4K-100-C is created automatically. Use the Device Discovery Tool in Crestron Toolbox to find the IP address of the DM-RMC-4K-100-C.
Crestron DM-RMC-4K-100-C 4K DigitalMedia 8G+ Receiver 100 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DM-RMC-4K-100-C Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Power LED...
Crestron worldwide offices at www.crestron.com/offices. To post a question about Crestron products, log onto Crestron’s Online Help at www.crestron.com/onlinehelp. First-time users must establish a user account to fully benefit from all available features.
4K DigitalMedia 8G+ Receiver 100 Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the DM-RMC-4K-100-C, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision.
(property or economic damages inclusive) arising from the sale or use of this equipment. Crestron is not liable for any claim made by a third party or made by the purchaser for a third party.
License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. Operations & Installation Guide – DOC. 7522C 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C • 25...
Page 32
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by 26 • 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C Operations & Installation Guide – DOC. 7522C...
Page 33
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Operations & Installation Guide – DOC. 7522C 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C • 27...
Page 34
4K DigitalMedia 8G+ Receiver 100 Crestron DM-RMC-4K-100-C This page is intentionally left blank. 28 • 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C Operations & Installation Guide – DOC. 7522C...
Page 35
Crestron DM-RMC-4K-100-C 4K DigitalMedia 8G+ Receiver 100 This page is intentionally left blank. Operations & Installation Guide – DOC. 7522C 4K DigitalMedia 8G+ Receiver 100: DM-RMC-4K-100-C • 29...
Need help?
Do you have a question about the DM-RMC-4K-100-C and is the answer not in the manual?
Questions and answers