Administrator Login; Users - Clean Logix ALX-ELITE User Manual

USER MANUAL: ALX-ELITE
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
This section explains how to setup the ALX-ELITE using the built-in keypad and screen. Alternatively, a
!
laptop or tablet can be used. For more information, refer to Appendix A - System Editor.

Administrator Login

1. Press the ADMIN key.
2. Type in a 4-digit administrator passcode.
NOTE: The default Administrator user
passcode is 1234. This passcode can be
changed under the "Users" section.
NOTE: Users will be automatically logged out
after 1 minute of inactivity for security.

Users

Adding a User
1. Log in as an administrator.
2. Use ↑ and ↓ keys to select Users and press
ENTER.
3. Select 00-Add New User and press ENTER.
4. Enter a Name and a 4-digit Passcode.
NOTE: Each user must have a unique 4-digit
passcode.
5. Use → and ← keys to grant or deny Administrator
privileges.
6. If desired, an RFID card can be scanned to
populate the RFID field.
NOTE: Only one RFID card can be assigned per
user, cards cannot be shared between other
users.
7. Press the ESC key to exit.
8. When prompted to save changes, press ← for Yes
or → for No.
Page 8 of 33 ALX-ELITE User Manual
ELITE Admin Menu
1-Users
2-Devices
3-Applications
4-Permissions
5-Unit Config
6-Unit Info
7-Set Date & Time
8-USB Options
9-Network Setup
10-Reporting
Edit Users
>00-Add New User
01-administrator
Editing User #02
Name:Jason
Password: 1234
Admin:
RFID: 0000000000
Edit Permissions
(DELETE Entry)
Save changes?
Are you SURE?
Press <= for Yes
Press => for No
>NO< YES
Last Update: 03/24/2021