Usb Options - Clean Logix ALX-ELITE User Manual

USER MANUAL: ALX-ELITE
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT

USB Options

The ALX-ELITE includes a 8GB USB drive already
plugged into the port on the bottom of the
controller. The controller will store dispense logs on
this USB drive, which can be retrieved manually or
automatically via e-mail. The USB drive can also be
used to import and export controller settings (Users,
Devices, Applications) and for software updates.
CAUTION:
!
Leave a USB drive plugged into the unit at all
times, except when manually retrieving logs or
importing/exporting. If the USB drive is removed
indefinitely or for long periods of time, the
controller will stop sending e-mail reports!
Export Settings
This will export the controller settings for Users,
Devices and Applications. It will create a file on the
USB drive named export.db in a folder named export.
1. Make sure a USB drive is plugged into the
controller port.
2. Log in as an administrator.
3. Use ↑ and ↓ keys to select USB Options and
press ENTER.
4. Use ↑ and ↓ keys to select Export Settings
and press ENTER.
Import Settings
This will import previously saved settings for Users,
Devices and Applications.
1. Follow the steps above to export settings onto a
USB drive and plug it into a laptop.
2. Create folder on the USB drive and call it import.
3. Save a copy of the export.db file into the import
folder and rename the copied file import.db
4. Plug the USB drive back into the controller
5. Use ↑ and ↓ keys to select Import Settings
and press ENTER.
Page 18 of 33 ALX-ELITE User Manual
USB Options
Export Settings
Import Settings
Update Dispense Lo
Update Software
CAUTION:
!
Always make sure to install and tighten the
protective cap after the USB flash drive is re-
inserted. If using a flash drive other than the one
included, make sure the protective cap will still fit
in place and screw on all the way!
NOTE: When importing settings, the system will
automatically reboot when finished.
Last Update: 03/24/2021