Factory Settings Reset - Nice DoubleSmart-Control Instructions And Warnings For Installation And Use

9

FACTORY SETTINGS RESET

Reset procedure allows to restore the device back to its factory settings, which means all information about the Z-Wave® controller and user
configuration is deleted.
Make sure that restoring the factory settings doesn't damage the connected device. We recommend disconnecting the device first.
Note
Resetting the device isn't the recommended way of removing the device from the Z-Wave® network. Use reset procedure only if the primary
controller is missing or inoperable.
To remove the device:
1. Press and hold the maintenance button to enter the menu.
2. Release the button when the LED indicator light glows yellow.
3. Quickly click the button to confirm.
4. After a few seconds the device is restarted, which is signaled with red LED indicator light.
9