Nice DoubleSmart-Control Instructions And Warnings For Installation And Use page 12

Table A5 - DoubleSmart-Control - Advanced parameters
Parameter
156. S1 input – This parameter defines the value
Switch ON value sent with the Switch ON command
sent to 2 nd associa- to devices in the 2
tion group group when using S1 input.
157. S1 input – This parameter defines the value
Switch OFF value sent with the Switch OFF command
sent to 2 associa- to devices in the 2
nd
tion group group when using S1 input.
158. S1 input –
This parameter defines the value
Double Click value
sent with the Double Click com-
sent to 2 associa-
nd mand to devices in the 2
tion group tion group when using S1 input.
159. S2 input – This parameter defines the value
Switch ON value sent with the Switch ON command
sent to 3 associa- to devices in the 3
rd
tion group group when using S2 input.
160. S2 input – This parameter defines value sent
Switch OFF value with Switch OFF command to de-
sent to 3 associa- vices in 3
rd
tion group using S2 input.
161. S2 input – This parameter defines value sent
Double Click value with Double Click command to de-
sent to 3 associa- vices in 3
rd
tion group using S2 input.
This parameter determines the type
162. Q1 output type
of Q1 output.
This parameter determines the type
163. Q2 output type
of Q2 output.
164. Lock simultane- When the lock is enabled, both
ous switching of Q1 outputs cannot be turned on at the
and Q2 outputs same time.
12
Description
association
nd
association
nd
nd associa-
association
rd
association group when
rd
association group when
rd
Available setting
0 – turn off
1-99 – turn on and set level
255 – turn on with last level
0 – turn off
1-99 – turn on and set level
255 – turn on with last level
0 – turn off
1-99 – turn on and set level
255 – turn on with last level
0 – turn off
1-99 – turn on and set level
255 – turn on with last level
0 – turn off
1-99 – turn on and set level
255 – turn on with last level
0 – turn off
1-99 – turn on and set level
255 – turn on with last level
0 – Normally Open (relay contacts are opened
when turned off and closed when turned on)
1 – Normally Closed (relay contacts are closed
when turned off and opened when turned on)
0 – Normally Open (relay contacts are opened
when turned off and closed when turned on)
1 – Normally Closed (relay contacts are closed
when turned off and opened when turned on)
0 – lock disabled
1 – lock enabled
Default Parameter
setting size
255 2 [bytes]
0 2 [bytes]
99 2 [bytes]
255 2 [bytes]
0 2 [bytes]
99 2 [bytes]
0 (Normally 1 [byte]
Open)
0 (Normally 1 [byte]
Open)
0 (lock dis- 1 [byte]
abled)