Download Print this page

Troubleshooting; Environment Protection - Sealey SUPERSTART200D Quick Start Manual

12/24v 200a starter/60a automatic battery charger

Advertisement

8.

TROUBLESHOOTING

PROBLEM
The "Error" light turns red and buzzer
sounds
The "Bad Battery" light turns red and
buzzer sounds
During the charging/starting process, the
display automatically returns to standby
condition and displays the battery voltage

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact
your local solid waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
.
POSSIBLE CAUSE
The clamps are reversely connected
Battery voltage is below 1V
Select 12V mode to a 24V battery
The connected battery voltage is between
1V to 4V
The charger is over-temperature
The clamp is loose
The output is short circuit
sales@sealey.co.uk
Original Language Version
SOLUTION
Connect the clamps correctly
Check whether clamps are connected or
replace battery
Change to 24V mode
Replace battery
Switch off machine and allow charger to
cool
Check the connections
Connect the clamps correctly
www.sealey.co.uk
SUPERSTART200D
Issue 2
REGISTER YOUR
PURCHASE HERE
24/04/24

Advertisement

loading
Need help?

Need help?

Do you have a question about the SUPERSTART200D and is the answer not in the manual?