Table of Contents
Advertisement
SIMPLICITY PLUS INSTALLATION MANUAL
12.10 SETTING THE LCD LANGUAGE
From Configuration menu 2, Select configure system (option 6).
Then from the Misc Settings menu, select option 1 (Language).
Pressing Prev / Next will scroll through the available languages.
The currently supported languages are:-
Language Bank 1:
English
Spanish
Portuguese
French
Italian
Language Bank 2:
English
Hungarian
Serbian
Lithuanian
12.11 SOFTWARE VERSIONS
From Configuration menu 2, Select configure system (option 6) .
Then from the Misc Settings menu, select option 2 (Version Info).
The panel will display the software versions in its two Microcontrollers, one for the main
functions and one for the Loop Driver. This information may be useful for technical support in
the Event of any problems occurring with the Control Panel.
(Note that the revision number is an internal reference number. It does not mean that there have been 8000+ software
revisions)
Approved Document No: GLT.MAN-107
Issue 3.16
Author: NRPJ
www.acornfiresecurity.com
Date: 21/09/2017
www.acornfiresecurity.com
Configuration Menu 2
4:Configure Loops
5:Edit Device
6:Config System
<
Configuration Menu 2
4:Configure Loops
5:Edit Device
6:Config System
<
Configuration Menu 2
4:Configure Loops
5:Edit Device
6:Config System
<
Misc Settings
1: Language 4: Mode
2: Version
5: Name
3: Protocol 6: Tone
Zeta Alarm Systems
Simplicity 252
Panel : 1.A – R8687
Loop
: 0.K – R8680
PAGE 29
Advertisement
Table of Contents
Need help?
Do you have a question about the SIMPLICITY PLUS SP-64/M and is the answer not in the manual?