Unist SmartFlow Instruction Sheet page 9

USB Backup and Restore Instruction Sheet
2. Select NEXT on the side of the Main Run Mode Menu (see Figure 15).
Figure 16. Main Run Mode Menu Showing Oiler Control
3. Select OILER CONTROL from the Main Run Mode Menu (see Figure 16).
3. This screen will display whether the Unist SmartFlow controller is running or not as well as
displaying the current oiler control job number that is being used. If the controller is not
running, please refer back to the Initialization oiler setup section and/or the Unist SmartFlow
Oiler user manual which you received with your controller. To return to the main Run mode
menu press the BACK button in the lower right corner of the screen.
Figure 17. Run Mode Oiler Control Screen
1137400
Page 9