Unist SmartFlow Instruction Sheet page 5

USB Backup and Restore Instruction Sheet
Figure 8. Main Initialization Menu with the OILER CONTROL shown.
4. Select OILER CONTROL from the Main Initialization Menu (see Figure 8).
5. The Oiler Control Utility Menu displays the default Oiler Setup settings for the SmartPAC
PRO unit (see Figure 9).
6. Select the "Oiler Type" button and toggle it so that it displays "Unist Smartflow". Next,
Select the "Oiler's IP Address" button and enter in the static IP address assigned to the Unist
controller in the IP address entry window (see Figure 10).
Figure 9. Oiler Ethernet Setup Menu Default Settings.
1137400
Page 5