Unist SmartFlow Instruction Sheet page 4

1137400
SmartPAC PRO Initialization Oiler Setup
Next, the SmartPAC PRO initialization settings must be configured to communicate with the Unist
SmartFlow® controller. To do so perform the following steps:
1. Turn the PROG/RUN key to PROG. On the Main Program Menu, press the
INITIALIZATION MENU button (Figure 6 below).
Figure 6. Main Program Menu with Initialization Menu button shown.
2. The Main Initialization Menu displays (shown below). Depending on the options installed,
you may need to advance to the next menu screen to view Oiler settings.
3. Select NEXT on the side of the Main Initialization Menu (see Figure 7).
Page 4
USB Backup and Restore Instruction Sheet
Figure 7. Main Initialization Menu