Page 1
Multi-Input HDBaseT Extender Switch and Scaler - 1080P ST121HDBTSC *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com...
Page 2
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Page 3
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
• 1 x IR Blaster Requirements Operating system requirements are subject to change. For the latest requirements, please visit www.startech.com/ST121HDBTSC • 1 x Local HDMI Display with Cabling • 1 x Remote HDMI Display with Cabling • (Optional Setup) 1 x DisplayPort Video Source with Cabling •...
Page 7
Installation Notes: Make sure that the HDBaseT Transmitter and HDBaseT Receiver are each located near an AC power outlet and that all devices connected to them are turned off. 1. Set up the video sources (HDMI, DisplayPort and VGA) and remote display. 2.
Page 8
Remote Display: • To copy EDID settings from a Remote Display, press and hold the EDID Copy Button for 3 seconds unil the Remote LED flashes green. Local Display: • To copy EDID settings from a Local Display, press and hold the EDID Copy Button for 6 seconds until the Local LED flashes green.
Page 9
3. On the Output Resolution sub-menu use the Navigation Buttons to navigate/select a resolution and press the Enter Button to save your changes. The following options may also appear when changing your resolution settings. Revert • Reverts back to the last resolution setting prior to saving. Keep •...
Limitation of liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 11
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the ST121HDBTSC and is the answer not in the manual?
Questions and answers