Minimum System Requirements - Yamaha M7CL Installation Manual

DME-N Network Driver
To operate your Yamaha hardware from your computer via Ethernet, you'll need to install the DME-N Network Driver
software.
DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the
hardware via Ethernet cable.
Connection of computer and the M7CL
Connect the computer to the M7CL by using an Ethernet cable via a network switch. When you connect the
computer to the M7CL directly, use a crossover cable.
Ethernet cable Ethernet cable
Network switch
Editor
or
Crossover cable
Driver
Computer
M7CL

Minimum System Requirements

DME-N Network Driver applies to the system requirements of M7CL Editor. Refer to the M7CL Editor Installation
Guide for details.
3
DME-N Network Driver Installation Guide for M7CL