Installation; Minimum System Requirements - Yamaha DME-N Installation Manual

To operate your Yamaha hardware from your computer via Ethernet, you'll need to install the DME-N Network Driver
software.
DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the
hardware via Ethernet cable.
Connection of computer and the LS9
Connect the computer to the LS9 by using an Ethernet cable via a switching hub. When you connect the computer
to the LS9 directly, you can use either a crossover or straight cable.
Editor
Driver
Computer
DME-N Network Driver applies to the system requirements of LS9 Editor. Refer to the LS9 Editor Installation Guide
for details.
1
Extract the data from the downloaded compressed file and open the "DME_Networkdrv_v***" folder.
"***" represents the version number.
2
Double-click on "Setup.exe."
When the setup has been initialized, a "Welcome" window appears.
3
Click [Next]. The YAMAHA DME-N Network Driver will be installed.
When installation is complete, a message appears indicating that setup has been completed.
4
In order for the newly installed YAMAHA DME-N Network Driver to take effect, select "Yes, I want to
restart my computer now," and click [OK].
The computer will restart.
n
When running under Windows XP SP2, an "Windows Security Alert" window may appear after the system is restarted. Select the
"Unblock" option.
The YAMAHA DME-N Network Driver has been installed.
DME-N Network Driver Installation Guide for LS9
DME-N Network Driver
Ethernet cable
Switching Hub
or
Ethernet cable

Minimum System Requirements

Installation

Ethernet cable
LS9
3