For Windows Vista; For Windows 7 - Yamaha M7CL Installation Manual

1
Log onto Windows with Administrator privileges.
n
In order to use the DME-N Network Driver, the computer and the M7CL must be properly connected and configured. For details
on connections, refer to
"Troubleshooting
Select [Start] → [Control Panel].
2
The "Control Panel" will appear.
3
If the control panel appears as category view, switch the view as follows:
For Windows XP
Click [Switch to Classic View] in the upper left of the control panel.

For Windows Vista

Click [Classic View] in the upper left of the control panel.

for Windows 7

Click [View by : Category] in the upper right of the control panel, and select "Large icons" or "Small icons".
n
When running under Windows Vista / 7, the "User Account Control" dialog box may appear. Click [Continue].
n
If an application that uses the DME-N Network Driver is running at this time the "Quit all applications that use the DME-N Network
Driver in order to change settings." message will appear. The DME-N Network Driver settings cannot be changed while any
application that uses the DME-N Network Driver is running.
DME-N Network Driver Installation Guide for M7CL
"Connection of computer and the
(FAQ)".
Setup
M7CL". For details on configuration, refer to "TCP/IP Settings" and
5