Troubleshooting (Faq) - Yamaha M7CL Installation Manual

When controlling the M7CL from your computer via Ethernet, the M7CL does not operate
correctly.
• Is the Ethernet cable connected correctly?
Refer to the "Connection of computer and the
• Is the DME-N Network Driver set up appropriately?
Refer to the "Setup" section.
• Did you enter an appropriate IP address of the M7CL?
Set the IP address of the M7CL at the Network popup window which is recalled from the SETUP screen of the M7CL.
If you are connecting the M7CL to your computer in a one-to-one connection, we recommend that you make the following
initial settings.
IP address
Gateway address
Subnet mask
However, it must not conflict with the IP address of any other device on the network.
For details on settings when connecting to a LAN, refer to the M7CL Editor installation guide.
• Is the computer network setup appropriately?
Confirm the network setup by following the procedures in the
If you are connecting the M7CL to your computer in a one-to-one connection, we recommend that you make the following
settings.
IP address
Subnet mask
Default gateway
However, it must not conflict with the IP address of any other device on the network.
For details on settings when connecting to a LAN, refer to the M7CL Editor installation guide.
• Are the settings of the M7CL and peripheral network devices (including switching hubs) appropriate?
Refer to the relevant owner's manuals for the M7CL and peripheral network devices (including switching hubs) for details.
• Have you selected an appropriate ports in the M7CL Editor and Studio Manager?
Select the M7CL as the input/output port settings of M7CL Editor and Studio Manager.
• Are you using the latest DME-N Network Driver?
The latest driver can be downloaded from the Yamaha website
• Are the settings of your security software appropriate?
If using Windows firewall:
For Windows XP
→
Click [Start] [Control Panel]
For Windows Vista
→
Click [Start] [Control Panel]
incoming connections] checkbox.
For Windows 7
→
Click [Start] [Control Panel]
permitted at [Inbound Rules] and [Monitoring]
DME-N Network Driver Installation Guide for M7CL

Troubleshooting (FAQ)

M7CL" section.
192.168.0.128
192.168.0.1
255.255.255.0
192.168.0.3
255.255.255.0
192.168.0.1
→ →
[Windows Firewall]
→ →
[Windows Firewall]
→
[Windows Firewall]. Confirm the communication with the DME-N Network Driver is
→
[Firewall].
"TCP/IP Settings" section.
http://www.yamahaproaudio.com/
[General] tab. Remove the [Don't allow exceptions] checkbox.
→
[Change settings] [General] tab. Remove the [Block all
12