Installing The Software; Software Installation; Minimum System Requirements - Yamaha M7CL Installation Manual

The M7CL Editor enables you to remotely monitor/control the Yamaha M7CL mixing console, save the parameter
settings on your computer, and also prepare the M7CL settings beforehand by editing the parameters offline.
1
Verify that your system meets the operating requirements of each software program.
2
Install the appropriate driver to your computer.
3
Install the Studio Manager and each editor.
4
Start up the Studio Manager, then start up the editor.
For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program.

Minimum System Requirements

The system requirements below may differ slightly depending on the particular operating system.
OS
Computer
Available Memory
Hard Disk
Display
n
The Minimum System Requirements described above are applied to the M7CL Editor version 2.1.0. Keep in mind that the software is
often updated and the system requirements are subject to change. You can check the latest version information of each program and its
system requirements at the following website
http://www.yamahaproaudio.com/
The system requirements may differ slightly depending on the particular computer.
M7CL Editor Installation Guide
M7CL Editor

Installing the Software

Procedures

Software installation

Windows XP Home Edition/XP Professional
800 MHz or higher; Intel Pentium/Celeron processor
256 MB or more
30 MB or more
1024 x 768, high color (16 bit) or higher
Windows
page 3
page 4
page 5
page 8
3