Cancel Button - Yamaha M7CL Installation Manual

6 Detected Device List
This list shows all detected devices. No devices will be displayed initially.
[Add] Checkbox
Checked devices will be added to the Target Device List when the [Add to Device List] button (below) is
clicked. Devices that are already registered cannot be checked.
Device IP Address
The IP address of the corresponding detected device.
Device Name
If a name has been registered for the detected device it will be displayed here, otherwise no name will be
displayed.
Device MAC Address
The MAC address of the corresponding detected device.
7 [Add to Device List] Button
Devices with checked [Add] checkboxes will be added to the Target Device List when this button is clicked.
8 [Cancel] Button
Closes the dialog box without making any changes.
9 [Import Setup from File] Button
When working in a different environment it is possible to load a previously saved setup file. Click to open the
"Open existing file" dialog box.
Select a setup file and then click the [Open] button to import the corresponding settings.
) [Export Setup to File] Button
It is possible to save the setup data to a file that can then be reloaded when working in a different environment.
Click to open the "Saves the current file with a new name" dialog box.
Enter a file name and click the [Save] button to save the setup file.
DME-N Network Driver Installation Guide for M7CL
9