Parametric Eq Editing Screen - Yamaha LS9 User Manual

Yamaha Commercial Audio
• If a PEQ curve is displayed, the PEQ Editing Screen will be accessed.
• If a GEQ curve is displayed, the GEQ Editing Screen will be accessed.
Note: the EQ editing screen will be accessed when the finger is removed from
the curve. Swipe gestures will not cause the Editing screen to be accessed.
4.6

Parametric EQ Editing Screen

The current channel's Name, Color, Fader, Level Meters, [ON] and [CUE]
buttons are shown in the left column. At the bottom-left, there are "previous"
and "next" arrow buttons for navigating to different channels.
Note: the In/Out meters display the levels going In and Out of the EQ section.
One band of Parametric EQ can be adjusted at a time. Press one of the green
circles to select the band, and it will be highlighted yellow. EQ bands in
StageMix are labelled as follows:
HP = HPF (input channels only)
1 = Low Band
2 = Low-Mid Band
3 = High-Mid Band
4 = High Band
The current values for Freq, Gain and Q will be displayed for the currently
selected EQ band.
LS9 StageMix V1.0 User Guide
Page 17