Sends On Faders - Yamaha LS9 User Manual

Yamaha Commercial Audio
4.4

SENDS ON FADERS

Press the [SENDS ON FADERS] button in the left column of the Mixer screen
to access sends to Mix busses. In "SENDS ON FADERS" mode, each fader
controls the send level from its channel to the currently selected Mix.
A large button will appear to show the currently selected Mix bus, and its
name. The color of this button matches those used on the LS9 console.
[CUE] and [ON] buttons appear below, allowing the currently active Mix bus to
be Cued and turned On/Off.
Press the colored [MIX ON FADERS] button to select a new target Mix Bus:
LS9 StageMix V1.0 User Guide
Page 14