Channel Names And Colors; Faders; Channel On - Yamaha LS9 User Manual

Yamaha Commercial Audio

4.1.3 Channel Names and Colors

The channel names are
obtained from the LS9 mixer.
They cannot be edited in
StageMix. The names are
dimmed if the channel is
switched off. A bar above
each channel name displays
the color for each channel as
assigned in the LS9.

4.1.4 Faders

Each fader has its channel number displayed on its cap. The fader cap
must be touched to allow the level to be adjusted. The fader will not
"jump" or "ramp" to a new position on the slider. When a fader cap is
touched, its background will lighten and its current dB value will be
displayed. Using the iPad's multi-touch facility, up to eight faders can
be moved simultaneously.

4.1.5 Channel ON

Press [ON] to change the on/off status of the channel. The button is
green when the channel is on. When a channel is off, its name and
level meter will go dim, and its fader position shown in the
"Navigation/Meter Bridge" will also go dim.
LS9 StageMix V1.0 User Guide
Page 10