Master Section - Yamaha DM2000 Owner's Manual

7
Chapter 2—Console Window

Master Section

Studio Manager for DM2000 V1.1—Owner's Manual
A
ONLINE status indicator
1
This indicator shows whether Studio Manager is online or
offline.
B
Meters
These meters display the output level of the Stereo Out when
PAN CONTROL is set to "STEREO," or the Bus Outs used for
surround processing when PAN CONTROL is set to "SURR."
The Meters in 3-1 and 5.1 Surround modes are shown below.
2
3
C
LAYER buttons
These buttons are used to select the Layers.
D
PAN CONTROL
These buttons are used to select either "STEREO" (Stereo mode)
4
or "SURR" (Surround mode). The Pan control on the Input
Channels is a rotary control when "STEREO" is selected, and a
dot on a pan graph when "SURR" is selected.
5
E
AUTO button
6
This button displays the Automix status of the Stereo Out.
7
F
SELECT button
This button is used to select the Stereo Out. If it's clicked while a
Remote Layer is selected, it will light up, but the Stereo Out will
not appear in the Selected Channel window.
G
ON button
This button turns the Stereo Out on and off. It appears orange
8
while the Stereo Out is on.
H
Channel fader
This is the Stereo Out fader.
3-1 5.1