Haier HI1MK Installation Instructions Manual page 7

Water Valve and Tubing Installation
1. Locate the wire harness that is placed on the right side of the
compressor compartment. (Factory preinstalled on the refrigerator)
(See fig. #8)
(Figure 8)
2. Plug the harness to the supplied water valve.
3. Remove the plastic cap from the bottom of the grommet. Insert the
plastic water supply tubing into the inlet as far as it can go. (See fig # 9)
(Figure 9)
Wiring
Harness
Plug
English
Water Valve
6