Setting Up The Dsa-3100 - D-Link DSA-3100 Owner's Manual

Setting up the DSA-3100

Make sure the DSA-3100 unit is not connected to the power
adapter and is powered OFF.
WAN port connection
Use 10/100BaseT connections to connect the unmanaged network.
The unmanaged network's interface may be the ADSL router's LAN
port, cable modem's LAN port or Intranet switch port.
Private LAN port connection
Use a straight-through cable to connect your admin PC with the
internal switch or hub that is connected to the local network port on
the DSA-3100. If you want to directly connect the DSA-3100 to this
PC or the wireless AP, use a crossover cable.
Public LAN port connection
Use a straight-through cable to connect your client PC with the
internal switch or hub that is connected to the authentication port on
DSA-3100. If you want to directly connect the DSA-3100 to this PC or
the wireless AP, use a crossover cable.
Power ON
Connect the supplied power adapter to the DSA-3100 and insert the
plug on the other end into an electric outlet.
Check the LED
The power LED and WAN LED should be ON, if the
corresponding WAN port is connected to an active cable/DSL
modem or T1 line.
The corresponding local network or authentication indicator should
be ON if a network device is connected to the local network port or
the authentication internal port.
11