Using The Configuration Utility - D-Link DSA-3100 Owner's Manual

Using the Configuration Utility

To configure the DSA-3100, use a computer which is connected to the local network
port of the DSA-3100 with an Ethernet cable.
First, disable the Access the Internet using a proxy server function. To
disable this function, go to Control Panel > Internet Options > Connections
> LAN Settings and uncheck the enable box.
Start your Microsoft Internet Explorer Web browser program.
Type the IP address of the DSA-3100 (the default IP address is
192.168.0.40) in the address field and press Enter. Make sure that the IP
addresses of the DSA-3100 and your computer are in the same subnet.
On the bottom of each configuration screen you will find the buttons shown below.
Click Apply in each
screen of the
Configuration Utility
in which you have
made changes.
Restart the DSA-3100 after completing any changes to its
configuration.
https://192.168.0.40
15