D-Link DSA-3100 Owner's Manual page 43

Using the Configuration Utility (continued)
DSA-3100 can monitor the IP
address from anywhere; up to
20 IP addresses can be
monitored. The system
periodically sends out packets
to check the status of the
selected network nodes by
pinging every 30 minutes. If
the node cannot be reached,
the DSA-3100 will send an E-
mail to the admin. every 30
minutes. For example: if you
specify a node which can't be
reached, the DSA-3100 will
send an E-mail to the admin.
at 1:00, 1:30, 2:00, 2:30,
3:00..etc, until the problem is
fixed.
DSA-3100 provides 2 built-in
user accounts: Admin and
Manager
Admin: This user is the
administrator of the DSA-
3100.
Manager: This user has the
right to manage a user
account, the admin. functions
are denied.
The Admin and the Manager
can change their passwords;
specify the current password
first. The new password must
be entered twice.
Note: If you lose the administrator's password, you can change the
administrator's password from the console interface.
Tools > Monitor IP List
Tools > Change Password
43