D-Link DSA-3100 Owner's Manual page 36

Using the Configuration Utility (continued)
Home > User Manager > Management Type > LDAP
LDAP:
To use LDAP as the authentication method, input the LDAP server IP address or
domain name and its LDAP server port. The settings will take effect immediately after
you click the Apply button. It is recommended that you restart the DSA-3100 after
these changes if there are any online users.
Login Schedule:
Define the time zone where the DSA-3100 is located and login duration for Guest
and General accounts. By default the time zone is GMT-07:00.
Define login duration for Guest accounts. Select Enable - Edit to enter the
management interface (as shown above). After durations are defined, you
need to click Apply, and then Save All to let the new functions take effect.
To define the login duration for General accounts use the same procedure
as above.
36