Table of Contents
Advertisement
DSA-3200 Wireless Service Gateway User Manual
6 Appendix - Windows TCP/IP Setup
If you have not changed the factory default settings of the DSA-3200 or Windows
2000/XP TCP/IP Configuration, it is not necessary to make any modification here.
With the factory default settings, the DSA-3200 will automatically assign an
appropriate IP address (and related information) to each PC after the PC has been
booted.
6.1 Setting up a PC to connect to the DSA-3200
After the DSA-3200 is installed, the following must be set up for the PC within the
Public LAN and Private LAN sections:
TCP/IP Network Setup
Internet Connection Setup
6.1.1 TCP/IP Network Setup
If the operating system of your PC is Windows 2000/XP, then you just need to
keep the default setting (without any change) to directly start/restart the system.
During the process of starting the system, the DSA-3200 with DHCP function will
automatically assign an appropriate IP address (and related information) for each
PC.
For the Windows based systems other than those for servers, the default setting
of the TCP/IP will be a DHCP client, and the setting is "obtain an IP address
automatically".
If you want to use the static IP in the Public LAN or Private LAN section or to
check the TCP/IP setup, please refer to section 6.2 for more information.
88
Advertisement
Table of Contents
