Table of Contents
Advertisement
Quick Links
In tutte le parti del presente manuale nelle quali si fa riferimento, quale fabbricante, a una delle seguenti
società:
Ravaglioli S.p.A., P.IVA e C.F.: 01759471202, con sede legale in Sasso Marconi (BO), Via 1°
•
Maggio, 3, Italia
Butler Engineering and Marketing S.p.A., P.IVA: 01741580359, C.F.: 01824810368, con sede
•
legale in Rolo (RE), Via dell'Ecologia, 6, Italia
•
Space S.r.l., P.IVA e C.F.:07380730015, con sede legale in Trana (TO), Via Sangano, 48, Italia
tale società deve essere intesa come:
con sede legale in Ostellato (FE), Via Brunelleschi, 9, Italia
per effetto della intervenuta fusione per incorporazione delle citate Ravaglioli S.p.A., Butler Engineering
and Marketing S.p.A. e Space S.r.l. in Officine Meccaniche Sirio S.r.l., ridenominata, a seguito della
fusione, Vehicle Service Group Italy S.r.l., avente efficacia giuridica a far data dal 1° luglio 2023.
Il presente Allegato 1 al Manuale di istruzioni costituisce parte integrante del Manuale di istruzioni stesso.
Simone Ferrari
Direttore Generale
ALLEGATO 1 AL MANUALE DI ISTRUZIONI
INFORMAZIONI SUL FABBRICANTE
Vehicle Service Group Italy S.r.l.
P.IVA: 01426630388
C.F.: 01633631203
1/1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Butler SPEED32 Series
Summary of Contents for Butler SPEED32 Series
- Page 1 C.F.: 01633631203 con sede legale in Ostellato (FE), Via Brunelleschi, 9, Italia per effetto della intervenuta fusione per incorporazione delle citate Ravaglioli S.p.A., Butler Engineering and Marketing S.p.A. e Space S.r.l. in Officine Meccaniche Sirio S.r.l., ridenominata, a seguito della fusione, Vehicle Service Group Italy S.r.l., avente efficacia giuridica a far data dal 1°...
- Page 2 Tax Code: 01633631203 with registered office in Ostellato (FE), Via Brunelleschi, 9, Italy as a result of the intervened merger by incorporation of the aforementioned Ravaglioli S.p.A., Butler Engineering and Marketing S.p.A. and Space S.r.l. into Officine Meccaniche Sirio S.r.l., renamed, following the merger, as Vehicle Service Group Italy S.r.l., having legal effect as of July 1...
- Page 3 ITALIENISCHE STEUERNUMMER: 01633631203 mit eingetragenem Rechtssitz in Ostellato (FE), Via Brunelleschi, 9, Italien als Folge der verschmelzenden Übernahme der vorgenannten Ravaglioli S.p.A., Butler Engineering and Marketing S.p.A. und Space S.r.l. in die Officine Meccaniche Sirio S.r.l., die nach der Verschmelzung mit rechtlicher Wirkung zum 1.
- Page 4 à Ostellato (FE), Via Brunelleschi, 9, Italie à la suite de la fusion par incorporation des sociétés Ravaglioli S.p.A., Butler Engineering and Marketing S.p.A. et Space S.r.l. dans Officine Meccaniche Sirio S.r.l., renommée, à la suite de la fusion, Vehicle Service Group Italy S.r.l., avec effet juridique à...
- Page 5 Ostellato (FE), vía Brunelleschi, 9, Italia como resultado de la fusión por incorporación de las mencionadas Ravaglioli S.p.A., Butler Engineering and Marketing S.p.A. y Space S.r.l. en Officine Meccaniche Sirio S.r.l., rebautizada, tras la fusión, Vehicle Service Group Italy S.r.l., con efectos jurídicos a partir del 1 de julio de 2023.
- Page 6 • En caso de dudas, para eventuales aclaraciones, póngase en contacto con el distribuidor más próximo ó diríjase directamente a: BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 1/62...
- Page 7 Faire trés attention attenzione careful ist geboten atención BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 2/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it...
-
Page 8: Table Of Contents
10.3.1 “ProView” vehicle search mode ........................29 10.4 Search for vehicles with plate no. with “SHOOT & GO” ..............30 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 1/62... - Page 9 16 STORAGE AND SCRAPPING ........................62 17 MACHINE IDENTIFICATION DATA ....................... 62 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 2/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it...
-
Page 10: Warnings
All the remaining trademarks mentioned, the reproduced logos and the images belong to the legitimate owners who fully hold the relevant rights. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 3/62... -
Page 11: Intended Use
Before carrying out any maintenance on the system, it is necessary to disconnect the power supply. • If in doubt, do not interpret, contact the Butler S.p.A. technical assistance in advance in order to receive information to be able to perform operations in conditions of maximum safety. -
Page 12: Equipment Composition
Power supply: 220/240 Vac single-phase 50/60Hz Max absorbed power: 500w BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 5/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 13: Cabinets Of The Models Speed32Sp
Power supply: 220/240 Vac single-phase 50/60Hz Max absorbed power: 500w BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 6/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 14: Cabinets Of The Models Speed32L
BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 7/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 15: Management Pc
(see para. 3.5.1 on p. 9 Figure 1 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 8/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 16: Measuring Head Keypads
LED on the CAMBER Tolerance REAR SIDE TOE Tolerance BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 9/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 17: Clamps With Target
STDA149) that allow correct mounting of the clamps with precise and simple orientation of the target. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 10/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 18: Turn Plates
BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 11/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 19: Equipment Characteristics
4.3 Overall dimensions SPEED32HPR/ SPEED32HP SPEED32SP SPEED32L Figure 5 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 12/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 20: Transportation And Installation
The assembly of the cabinet of the SPEED32L models, instead, is illustrated in the specific instruction, which is sup- plied with the equipment. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 13/62... -
Page 21: Clamp / Target Mounting
(FL), front right (FR), rear left (RL) and rear right (RR) positions. See Figura 4 on page 10 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 14/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 22: Fixing Of Measuring Head Supports
Figure 7 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 15/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... - Page 23 / front target 1150 mm) / front target 1550 mm) BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 16/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it...
-
Page 24: Switching The Equipment On And Off
Activates the switch off proce- dure of the equipment Figure 9 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 17/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 25: Automatic Switching Off Of The Measuring Heads
To exit the error report page, press the F1 key BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 18/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 26: Program Configuration
Moves the selection up. Moves the selection down. Confirms the selection. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 19/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 27: Database Groups Configuration
Choose the “DATABASE” option and confirm. The screen that appears next is the following: Figure 13 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 20/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... - Page 28 F5 key Logo displayed Logos hidden Figure 15 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 21/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it...
-
Page 29: Miscellaneous
"Test Drive" and the display of the diagnosis summary. Figure 17 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 22/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... - Page 30 Figure 19 To exit the page, press the F1 key BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 23/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it...
-
Page 31: Diagnosis And Adjustment Of A Vehicle
(para. 9.1 on p. 20) Press key F4 to continue. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 24/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 32: Preliminary Operations
- Attach and switch on (*) the 2 measuring heads on the edges of the lift (see Figure 1) Mount the clamps with the four targets on the wheels, positioning the upper arm at 12 o'clock BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 25/62... - Page 33 ALWAYS be careful to position the vehicle on the centred lift, it must be as centred as possible, in order to speed up and optimise the search and engagement of targets and subsequent measurements. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 26/62...
-
Page 34: Selecting The Make And Model Of A Vehicle
(para. 10.5) BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 27/62... - Page 35 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 28/62...
-
Page 36: Proview" Vehicle Search Mode
Engine Code Selection Figure 27 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 29/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 37: Search For Vehicles With Plate No. With "Shoot & Go
NOTE 3: To proceed by selecting the vehicle in "traditional" search mode, press the key (see chap. 10.3° p. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 30/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 38: Displaying Of Pre-Selected Vehicle Technical Data
(Run-out com- pensation procedure - para. 10.6 on p. 36) BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 31/62... -
Page 39: Speed32Sp - Speed32L (05/2021)
Loading Unloading AXLE REAR Loading Unloading Figure 31 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 32/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 40: Display Of Additional Measurements On Chassis Heights
Press the F4 key to confirm the entered values. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 33/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 41: Display Of Check Measurements On Chassis Heights
Enter the control values, and press the F4 key to confirm the entered values. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 34/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 42: Display Of Images For Aid In Adjustment
Note: also during the later adjustment phase (para. 10.12 on p. 42), if there are images for adjustment aid, an F1 is available, to be able to view them if necessary. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 35/62... -
Page 43: Push Run-Out With Automatic Acquisition
When ready, move the vehicle forward very slowly until the arrow of the vehicle matches the point of arrival. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 36/62... - Page 44 F1 key and then repeat the operations mentioned above. When the run-out has been performed, the pro- gram automatically proceeds to the next step. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 37/62...
-
Page 45: Preparing For Measurements
Press the key to continue. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 38/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 46: Aligning Of The Vehicle / Direct Measurements
When alignment is achieved, the "STOP" sign image appears, indicating that the program is acquiring the vehicle data measurements. The program proceeds automatically only after the wheels have been aligned. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 39/62... -
Page 47: Steering Procedure
If the procedure is not performed but it is decide to perform it anyway at the end of the adjustments, it is possi- ble to select the appropriate option in the menu. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 40/62... -
Page 48: Vehicle Diagnosis
Figure 47 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 41/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 49: Rear Axle Adjustment
Press the space bar again to remove the symbol and thus to deactivate the “Beep”. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 42/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 50: Front Axle Adjustment
(*) It is possible to display alternatively the partial-toes or the total toe, by pressing the Shift + F5 keys simultaneously. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 43/62... -
Page 51: Steered Wheels Front Toe Adjustment
10.13). The program prompts steering back to centre before displaying the front adjustment page (Figure 49). Figure 51 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 44/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 52: Jack-Hold" Procedure
At this point, the program displays the adjustment data again (see para. 10.13 on p. 43) press the key to display the summary page (para. 10.14 on p. 46) BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 45/62... -
Page 53: Summary Of The Adjustment Diagnosis Data
Returns to the rear adjustment phase. See para. 10.12 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 46/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 54: Test Drive" Procedure - Steering Wheel Alignment Check
NOTE: It is necessary to activate the “Miscellaneous 2” option in the menu in advance (see para. 9.2 on page 22). BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 47/62... -
Page 55: Auxiliary Functions Menu
Moves the selection up. Moves the selection down. Confirms the selection. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 48/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 56: Chassis Diagnosis
“Chassis Diagnosis”measurements. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 49/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 57: Printing Of Measurements Taken
(*) The data contained in the "customer database" can be accessed from the presentation page using the F3 (para. 10.1 on p. 24) Figure 60 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 50/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... - Page 58 9 - Rear axle data table 10 - Space reserved for notes that can be entered manually BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 51/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it...
- Page 59 SPEED32SP - SPEED32L Example of tabular printing Figure 61 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 52/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it...
- Page 60 / green depending on the tolerances tolerance Figure 62 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 53/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it...
-
Page 61: Saving Of Tests Performed With Teq-Link
PC with Saved tests Figure 63 BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 54/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 62: Database Customisation
Figura 66. Press F1 to exit. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 55/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 63: Deletion Of A New Group
Attention: If a customised group is deleted, it will no longer be possible to recover it, unless in possession of a backup copy of the database. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 56/62... -
Page 64: Insertion Of A New Vehicle
Deletes the entire selected element Deletes the last character of the selected element BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 57/62 Tel. +39 0522 647911, Fax +39 0522 649760 e-mail: info@butler.it / www.butler.it... -
Page 65: Deletion Of A Customised Vehicle
Attention: If a customised vehicle is deleted, it will no longer be possible to recover it, unless in possession of a backup copy of the database. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 58/62... -
Page 66: Smartcard For Program And Database Protection
To install or update a new database, always refer to the manual cod. M0251 downloadable from the databank site highlighted in your SMART CARD. BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 59/62... -
Page 67: Errors During Measuring
• Press the “Esc” key on the keypad to return to the presentation page (cap.10 on p.24). • Proceed with the usual shutdown of the equipment (see para.6.2 on p. 17). BUTLER Engineering & Marketing S.p.A. a s.u. - Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy) P. 60/62... -
Page 68: Problems
Before carrying out any work on the system, it is necessary to disconnect the power supply. If in doubt, do not interpret, contact the Butler S.p.A. technical assistance in advance in order to receive information to be able to perform operations in conditions of maximum safety. -
Page 69: Storage And Scrapping
For further more detailed information on the management of batteries and accumulators at the end of their service life, contact the After-Sales Service of Butler S.p.A.
Need help?
Do you have a question about the SPEED32 Series and is the answer not in the manual?
Questions and answers