Dac (Digital/Analog Converter) Mode - Yamaha CDR-HD1000 Owner's Manual

OTHERS

DAC (Digital/Analog Converter) Mode

This unit has a DAC mode function. You can switch the input
signals, as an input selector, to output from both the analog and
digital jacks to the amplifier connected to this unit.
1.
Press MENU to display the menu item selection while
this unit is in the stop mode.
2.
Select "DAC mode" by rotating the MULTI JOG knob
(pressing +/– on the remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to enter the DAC mode.
4.
The input source selected by INPUT is output both
from the ANALOG LINE OUT (PLAY) jacks and from
the DIGITAL OUT (OPTICAL/COAXIAL) jacks.
• When OPTICAL or COAXIAL is selected, the MULTI JOG
knob functions as a volume control.
• When ANALOG is selected, the ANALOG REC LEVEL
control functions as a volume control.
5.
Any of the following operation cancel the DAC mode
and start normal operation.
• Press w/d (w on the remote control) to play the drive that had
been selected before entering the DAC mode.
• Press a to set this unit in the stop mode.
• Press COMPLETE to set this unit in the stop mode.
62
E-
L
dB –30 –10 –6 –2 0
R