Yamaha CDR-HD1000 Owner's Manual page 65

I To change the display brightness (Dimmer Setup)
You can change the brightness of the display.
1.
Press MENU to display the menu item selection while
this unit is in the stop mode.
2.
Select "Sys. Utility" by rotating the MULTI JOG knob
(pressing +/– on the remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to display the system utility item selection.
4.
Select "Dimmer Setup" by rotating the MULTI JOG
knob (pressing +/– on the remote control).
5.
The current setting is indicated on the display if the
MULTI JOG knob (ENTER on the remote control) is
pressed.
(Initial setting)
The selection and the brightness change in 3 levels as the
MULTI JOG knob is rotated (+/– on the remote control is
pressed).
6.
Press the MULTI JOG knob (ENTER on the remote
control) or COMPLETE.
The display brightness has been set.
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R
I To set auto play (Auto Play)
You can set the auto play function which automatically starts
playback when the power of this unit is turned on.
1.
Press MENU to display the menu item selection while
this unit is in the stop mode.
2.
Select "Sys. Utility" by rotating the MULTI JOG knob
(pressing +/– on the remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to display the system utility item selection.
4.
Select "Auto Play" by rotating the MULTI JOG knob
(pressing +/– on the remote control).
5.
The current setting is indicated on the display if the
MULTI JOG knob (ENTER on the remote control) is
pressed.
(Initial setting)
Select "Auto Play On" by rotating the MULTI JOG knob
(pressing +/– on the remote control).
6.
Press the MULTI JOG knob (ENTER on the remote
control) or COMPLETE.
The auto play function will be turned on and applied when the
power of this unit is turned on the next time.
• This unit plays data on the drive that had been last selected
when the power of this unit was last turned off.
• This unit plays in the playback mode (such as random play)
that had been last set when the power of this unit was last
turned off.
Note
• Initial setting is "Auto Play Off".
I To update the firmware version (Firm. Update)
This menu is prepared for the expansion of the functions in the
future.
OTHERS
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R
61
E-