D-Link DVC-1000 Manual page 31

Using the Configuration Menu (continued)
Main Screen > Settings > Update
The Update screen has several functions:
Set the checkbox to automatically check for updates of the DVC-
1000 VideoPhone.
Check for an update right now.
Display the current version information.
Set Defaults will restore all settings to factory defaults. This will
erase all speed dial entries that have been added.
If you select Check Now for an Update then the DVC-1000 will check for an
update. If an update is found the following message will appear.
Clicking YES will begin an update of the firmware in the DVC-1000. A
restart of the DVC-1000 is required after the update is complete.
31