Using The Dvc-1000 - D-Link DVC-1000 Manual

Using the DVC-1000

Main
Window
Status
Message
Area
Banner
Window
After you have correctly setup the i2eye VideoPhone using the Setup Wizard
you will see the above Main Screen each time you turn on the VideoPhone.
There is a larger Main Window that displays the self-view until a call is
connected and then displays the party you are calling. The smaller Self-View
Window then displays the self-view when a call is connected. The self-view
is a cropped image of what the other party is actually seeing. To flip the
images that are in the Main Window and Self-View Window press the
Self/Remote button on the remote control.
Status Icons
The Status Icons appear only briefly at startup. The DVC-1000 uses icons to
indicate its status. The icons display on the top right side of the Main Screen.
If an icon is displayed, this indicates the operation is not complete. The icon
will disappear after the operation completes. If the icon appears with a yellow
"X" through it, this means the operation was unsuccessful. If the Directory
Service status icon is displayed with an "X" through it, you can still make
videophone calls by inputting the IP Address of the phone that you are calling.
(See the Manual Dial screen on page 20.) This is a list of the status icons:
Looking for i2eye updates
Obtaining the Public IP Address (Router's Address)
DVC-1000 is registering with the Directory Service
Layout of the i2eye Main Screen
Status
Icons
Main
Settings
Buttons
Privacy
Status
Icons
Self-View
Window
14