Digital Watchdog DWC-VSTB04Bi User Manual page 46

When the SD Memory Card has reached full-capacity a notification alarm
will be triggered.
Go to Setup>Alarm>SD Card Full.
• Enable: Enable to activate the SD Card Full feature.
•
Alarm Holding Time: Refers to the interval time between the
adjacent motion detections. The alarm will remain active for the
duration of the holding time.
•
Trigger Email: Enable to allow the camera to use SMTP to send e-mail
notifications when the alarm is triggered. Refer to
for more information.
• Trigger FTP: Enable to allow the camera to send snapshots and
recordings to an external FTP server when the alarm is triggered.
Refer to Section
SD Card Error
When there are errors in writing on the SD card, a notification alarm will be
triggered.
Go to Setup>Alarm>SD Card Error.
5.2.10 FTP
for more information.
41
Section 5.2.9 SMTP