Saxby Lighting Luminatra Spike Instruction Leaflet

Check that...
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of the connection
block.
Commissioning
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
Finish - We recommend cleaning with a soft dry cloth.
Do not use abrasive materials as these will damage the
finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
This LED's are protected by a plastic lens. The lens part must be replaced immediately should it
become cracked or damaged. This fitting must not be used without the plastic lens in place.
WWW.saxbylighting.com
www.saxbylighting.com
• Ensure that all cord grips are tightly secured.
• Ensure that all seals are re-fitted correctly.
This system contains non-replaceable parts and cannot
be serviced. If damage occurs the part should be
scrapped.
Iss.5 8/11/2018
Saxby lighting. BH23 3PE
Saxby Lighting Ltd. BH23 3PE
Instruction leaflet
Luminatra Spike
78635, 78636