Saxby Lighting 534PG Instruction Leaflet

Commissioning
good quality insulation tape.
making sure that no cables are trapped or exposed
and secure with the 6 screws removed previously.
Push the cover plate – removed previously – onto the
led housing unit.
Fitting/Replacing bulbs
We recommend cleaning with a soft dry cloth.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.
This light source is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked Shade
UK Manufacturer: BH17 7BY
light is now ready for use.
Do not use solvents or abrasive cleaners as these could
damage the finish.
14/05/2021
Instruction leaflet
Pilot Anti-Glare Brick Light
534PG, 571PG