Anova L1301S Assembly Instructions

anovafurnishings.com
888.535.5005 tel
tAble components:
1 x Table Top
4 3
Assembly HArdwAre:
D
C
4 x 16 x
B
5/16 X 1.25" 1/4 x 5/8" Button
Hex Head Bolt Head Allen Screw
A
4 3
Assembly:
The assembly is a two-person operation.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Assemble the Table over the shipping packaging
or padded work area to avoid scratching the
product.
note: Before assembling the Nuts to the Bolts, it is
recommended that a light oil or petroleum jelly be
applied to the screw threads.
3. Locate the Seat Support and place the Support on
the work surface with the seat platforms oriented
upward.
4. Locate one of the Seat Swivels. Position the Seat Swivel on one
of the Seat Platforms so that the mounting holes in the Seat
Swivel align with the mounting holes in the Seat Platform.
note: The word "Front" is stamped into the frame of the swivel.
This should be oriented toward the center of the Table
assembly.
Install four of the 1/4" Button Head Allen Screws through the
bottom plate of the Swivel and the Support Mounting Plate.
Add 1/4" Nylock Nuts and tighten the Nuts after all four Screws
are installed.
Install the remaining Seat Swivel in the same manner. The
Screw heads must be inside the Swivel and the Nylock Nuts
must be outside of the Swivel for the Swivel to work properly.
S135 - HRD132
Assembly InstructIons
l1301s Rendezvous Bistro Table
l1401s Latitude Bistro Table
l1701s Cosmopolitan Bistro Table
tools needed:
• Ratchet with 1/2" Socket
• 1/2" Open End or Box End Wrench
• #4 Phillips Screwdriver
• 5/32" Allen Wrench
• 7/16" Open End or Box End Wrench
1 x Seat Support
2 1
D
C
8 x
B
5/16 X 1.25"
Phillips Hd Screw Nylock Nut
DRAWN
BMENDEZ 6/19/2014
CHECKED
TITLE
QA
A
MFG
APPROVED
SIZE DWG NO REV
C
SCALE SHEET 1 OF 1
2 1
2 x Contour Seat
(Pattern may vary)
16 x 16x 12 x
1/4" 5/16" Flat 5/16"
Washer Nylock Nut
Seat Support
Packing cardboard or
other soft work surface
2 x Swivel
2 x Seat Mount
Seat Platform
1/4" Screw
Swivel
Seat Support