Advertisement
Quick Links
anovafurnishings.com
888.535.5005 tel
tools needed:
•
Ratchet with 1/2" Socket
•
1/2" Open End or Box End Wrench
•
5/32" Allen Wrench
•
Rubber Mallet
tAble components:
1 x Table Top
Assembly HArdwAre:
60 x
5/16 X 1.0"
5/16" Flanged Nut
Hex Head Bolt
Assembly:
The assembly is a two-person operation.
1.
Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2.
Assemble the Table over the shipping packaging or padded work area to avoid scratching the product.
NOTE: Before assembling the Nuts to the Bolts, it is recommended that a light oil or petroleum jelly be applied to the screw threads.
3.
Open the Hardware package and find the six black plastic Plugs. Insert a Plug in the hole on the bottom of each of the Seat
Supports. Use the Rubber Mallet to seat the Plugs.
Assembly InstructIons
l1390 6-Seat Rendezvous Table with Flat Seats
l1392 6-Seat Rendezvous Table with Contour Seats
l1444 6-Seat Latitude Table with Flat Seats
l1446 6-Seat Latitude Table with Contour Seats
1 x Table Top Pan
1 x Lower Leg
60 x
120 x
5/16" Flat
Washer
6 x Seat Support
Bracket
14 x
1/4 x 1.5" Button
1/4" Flat Washer
Head Allen Screw
Plug
Rendezvous models shown
seat shape and pattern may vary
OR
OR
6 x Seat Mount
Contour Seat
14 x
6 x
Plug
Seat Support
6 x Flat or
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Anova L1390
Summary of Contents for Anova L1390
- Page 1 Assembly InstructIons l1390 6-Seat Rendezvous Table with Flat Seats l1392 6-Seat Rendezvous Table with Contour Seats l1444 6-Seat Latitude Table with Flat Seats l1446 6-Seat Latitude Table with Contour Seats anovafurnishings.com 888.535.5005 tel tools needed: • Ratchet with 1/2” Socket • ...
- Page 2 Locate the Lower Leg Bracket. Install a 5/16” Seat Support Flat Washer on one of the 5/16” Hex Head 5/16” Bolt Bolts and insert the Bolt through one of the 5/16” Flat mounting holes in the Lower Leg Bracket and Washer into the lower mounting hole in one of the Lower Leg Bracket...
- Page 3 Place a 1/4” Flat Washer on the end of one of the Button Head Allen Screws and insert the screw through one of the Pan mounting holes in the outer bolt circle and into the corresponding threaded hole in the Seat Support. Leave the Screw finger tight.
- Page 4 Lift the Table Top and move it over the top of the Table Top Pan. Rotate the Table Top until the square frame on the bottom of the Table Top matches the orientation of the Table Top Pan. Carefully lower the Table Top down onto the Table Top Pan. Secure the Table Top to the Table Top Pan using the remaining eight Button Head Allen Screws (2 screws on each side) with a 1/4”...
Need help?
Do you have a question about the L1390 and is the answer not in the manual?
Questions and answers