1. Manuals
  2. Brands
  3. Manhattan Manuals
  4. Barcode Reader
  5. IDATA CCD-2D-WREL
  6. User manual

Manhattan IDATA CCD-2D-WREL User Manual

2d led barcode scanner
Hide thumbs Also See for IDATA CCD-2D-WREL:
Table of Contents

Advertisement

Quick Links

Download this manual
2D LED Barcode
Scanner
User Manual
Model 153997
manhattanproducts.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IDATA CCD-2D-WREL and is the answer not in the manual?

Questions and answers

Related Manuals for Manhattan IDATA CCD-2D-WREL

Summary of Contents for Manhattan IDATA CCD-2D-WREL

  • Page 1 2D LED Barcode Scanner User Manual Model 153997 manhattanproducts.com...
  • Page 2 All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Manhattan is a trademark of IC Intracom, registered in the U.S. and other countries. This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic medium or machine readable form without prior written consent of maker.

  • Page 3: Table Of Contents

    User Manual 2D LED Barcode Scanner TABLE OF CONTENTS COMPREHENSIVE SETTINGS ........................7 SETTING CODE ............................7 ENABLE AND DISABLE THE SETTING CODE ....................7 SENDING SETTING CODE ........................8 RESTORE FACTORY SETTINGS .......................8 VERSION NUMBER ..........................8 USER DEFAULT SETTINGS ........................9 SOUND SETTINGS ..........................10 ALL TONE SETTINGS ..........................10 POWER-ON PROMT SOUND ........................10 SETTING CODE SOUND ........................10...
  • Page 4 2D LED Barcode Scanner User Manual INDUCTIVE / AUTO-SENSING READING MODE ..................26 INDUCTION MODE-SINGLE READING TIME LIMIT ................26 INDUCTION READING MODE-SAME BARCODE READING DELAY ............26 INDUCTION MODE-IMAGE STABILIZATION TIME ..................28 INDUCTION MODE-SENSITIVITY ......................28 DATA EDITING ............................29 INTRODUCTION .............................29 CODE ID SETTINGS ..........................29 CODE ID PREFIX ..........................29 CODE ID PREFIX ..........................29 CUSTOM CODE ID ..........................30...
  • Page 5 User Manual 2D LED Barcode Scanner EAN-13 ..............................42 ALLOW/PROHIBIT READING EAN-13 ....................42 SEND CHECK CHARACTER .........................42 2/5 ADDITIONAL BITS .........................42 CONVERT TO ISBN ..........................43 CONVERT TO ISSN ..........................43 CODE 128 .............................43 ALLOW/PROHIBIT READING CODE 128 .....................43 CODE 39 ...............................43 ALLOW/PROHIBIT READING CODE 39 ....................43 CHECK CHARACTER SETTING ......................44 TRANSMIT START CHARACTER AND END CHARACTER ...............44 FULL ASCII RECOGNITION RANGE .....................44...
  • Page 6 2D LED Barcode Scanner User Manual GS1 DATABAR LIMITED ..........................51 GS1 DATABAR EXPANDED ........................51 APPENDIX ..............................52 APPENDIX-DATA CODE..........................52 APPENDIX-DATA CODE..........................52 APPENDIX-DATA CODE..........................53 APPENDIX-CODE ID ..........................56 APPENDIX-ASCII CODE TABLE .......................56...

  • Page 7: Comprehensive Settings

    User Manual 2D LED Barcode Scanner COMPREHENSIVE SETTINGS SETTING CODE The scanner can set the function by reading the corresponding one or a group of special barcodes. In the following chapters, we will introduce the setting options and functions in detail and provide the corresponding setting codes. INSTRUCTIONS In manual barcode reading mode, the operation steps for scanning barcodes are as follows.

  • Page 8: Sending Setting Code

    2D LED Barcode Scanner User Manual SENDING SETTING CODE The content of the setting code can be allowed to be sent. After reading the “send setting code” and setting successfully, the content will be sent to the host when the setting code is read; after reading the “do not send setting code”...

  • Page 9: User Default Settings

    User Manual 2D LED Barcode Scanner USER DEFAULT SETTINGS In addition to the factory settings, users can also save their frequently used configuration as user default settings. By scanning “Save User Default Settings”, the current configuration information of the device can be saved as user default settings.

  • Page 10: Sound Settings

    2D LED Barcode Scanner User Manual SOUND SETTINGS ALL TONE SETTINGS Turn on all sounds Turn off all sounds POWER-ON PROMT SOUND Turn on or turn off the beep sound when starting up. Turn on sound Turn off sound SETTING CODE SOUND Scan setting code prompt sound on or off.

  • Page 11: Setting Sound Volume For Successful Reading

    User Manual 2D LED Barcode Scanner SETTING SOUND VOLUME FOR SUCCESSFUL READING Set the volume of the prompt sound for reading barcode successfully. Low sound volume for Middle sound volume for High sound volume for successful reading successful reading successful reading SUCCESSFUL READING INDICATOR LIGHT SETTING SUCCESSFUL READING INDICATOR LIGHT Turn on successful reading indicator...

  • Page 12: Lighting Settings

    2D LED Barcode Scanner User Manual LIGHTING SETTINGS FILL LIGHT ILLUMINATOR The illuminator can provide auxiliary lighting for shooting and reading, and the light beam illuminates the reading target to improve the reading performance and the ability to adapt to weak ambient light.

  • Page 13: Image Recognition Settings

    User Manual 2D LED Barcode Scanner IMAGE RECOGNITION SETTINGS IMAGE INVERSION (REVERSE WHITE) SETTING Normal phase bar code: bar code with light background and dark bar Inverted bar code: dark background, light bar code, also known as reverse white bar code, reverse color bar code ALLOW READING: PROHIBIT READING: Reverse color barcode...

  • Page 14: Nr Is Prompted If The Barcode Is Not Successfully Read

    2D LED Barcode Scanner User Manual NR IS PROMPTED IF THE BARCODE IS NOT SUCCESSFULLY READ Before releasing the trigger button, if the barcode cannot be read within the timeout period, it is allowed to send NR (No Read) message. Any feasible prefix or suffix can be attached to this message ELEMENT ACTION Turn on...

  • Page 15: Communication Settings

    User Manual 2D LED Barcode Scanner COMMUNICATION SETTINGS INTRODUCTION When using this scanner to communicate with different hosts, you need to set the scanner to the corresponding communication interface mode. You can set the scanner’s functions by scanning one or more setting bar codes. You can choose to use USB (USB- KBW, USB-COM), TTL, RS232 serial communication interface modes, etc.

  • Page 16: National Keyboard Layout

    2D LED Barcode Scanner User Manual NATIONAL KEYBOARD LAYOUT The keyboard key arrangement, symbols, etc. corresponding to different national languages are not the same. The scanner can be virtualized into different national keyboard standards according to actual needs. The keyboard layout setting is applicable to the USB-KBW interface mode, and the default is “American English keyboard”.

  • Page 17: Usb Transmission Speed (Delay Between Characters)

    User Manual 2D LED Barcode Scanner USB TRANSMISSION SPEED (DELAY BETWEEN CHARACTERS) This parameter is used to adjust the delay time between scanner barcode characters. When the input host needs slower data transmission, scan the corresponding barcode below to increase the inter-character delay, which can adjust the transmission speed and improve the safety and integrity of output data.

  • Page 18: Usb Polling Speed

    2D LED Barcode Scanner User Manual USB POLLING SPEED The keyboard polling speed can be set to 1~10 ms by the following setting code. The smaller the set value, the faster the reading module can send characters to the host. If the host will lose characters, please increase the polling speed setting value.

  • Page 19: Usb Hid-Pos Interface

    User Manual 2D LED Barcode Scanner USB HID-POS INTERFACE The USB HID-POS interface is recommended for new application software. Based on the HID interface, no driver is required. USB HID-POS PROTOCOL FORMAT: 0x26f1 0x8803 HOST SEND DATA FORMAT BYTE CONTENT Message ID (0x04) Effective data length 2-61...

  • Page 20: Ttl/Rs232 Serial Interface

    2D LED Barcode Scanner User Manual TTL/RS232 SERIAL INTERFACE Serial communication interface is a common way to connect scanners and host devices, and can be used to connect to host devices such as PCs and POS machines. When the scanner uses the serial communication interface, the scanner and the host device must match the serial communication protocol parameter configuration completely to ensure the accuracy of the transmitted data.

  • Page 21: Reading Mode

    User Manual 2D LED Barcode Scanner READING MODE MANUAL READING MODE Set to manual reading mode, press the button to start reading, and the reading will not stop when the button is released, the reading will stop if the reading is successful or the reading exceeds the single reading time.
  • Page 22 2D LED Barcode Scanner User Manual the same bar code can be read and transmitted after the timeout limit time after reading the same bar code. Set to “Require the same barcode reading delay” and set “Reread timeout reset”, which means that the same barcode will not be read and transmitted if it continues to read the same barcode within the limited time after reading.

  • Page 23: Continuous Reading Mode

    User Manual 2D LED Barcode Scanner CONTINUOUS READING MODE After setting, the scanner is in continuous scanning state, without triggering, the reading engine starts to read the code immediately. When the reading is successful, the information is output or the single reading time is over, the reading engine will wait for a period of time (settable) and it will start automatically Read the code once.

  • Page 24: Continuous Reading Mode-Reading Interval Time

    2D LED Barcode Scanner User Manual CONTINUOUS READING MODE-READING INTERVAL TIME The reading interval is the time between two readings. Regardless of whether the reading is successful or unsuccessful, there will be a set time interval between two readings, during which no acquisition and reading will be performed.
  • Page 25 User Manual 2D LED Barcode Scanner No delay when reading Require the same Reread timeout Reread timeout reset the same barcode barcode reading delay does not reset Read the following setting codes, you can quickly modify the limit value of the same code reading delay time.

  • Page 26: Inductive / Auto-Sensing Reading Mode

    2D LED Barcode Scanner User Manual INDUCTIVE / AUTO-SENSING READING MODE In the auto-sensing mode, the reading module will monitor the captured images. When the scene changes, it will be read within the “single reading time” within a limited time. After the reading is successful, it will output information or time out, and then re-enter the monitoring The state of the scene change.
  • Page 27 User Manual 2D LED Barcode Scanner Set to “Require the same bar code reading delay” and set “Reread timeout without reset”, which means that the same bar code can be read and transmitted after the timeout limit time after reading the same bar code. Set to “Require the same barcode reading delay”...

  • Page 28: Induction Mode-Image Stabilization Time

    2D LED Barcode Scanner User Manual INDUCTION MODE-IMAGE STABILIZATION TIME In the induction mode, when the scanner stops reading the code, it will enter a process of re- adapting to the changes in the reading environment (image). After the image is stabilized, it will enter the induction state and wait for the barcode to appear.

  • Page 29: Data Editing

    User Manual 2D LED Barcode Scanner DATA EDITING INTRODUCTION After the scanner successfully reads the code, the device obtains a string of data, which can be numbers, English, symbols, etc. In practical applications, we may not only need the data information of the bar code, or the data information contained in the bar code cannot meet your needs.

  • Page 30: Custom Code Id

    2D LED Barcode Scanner User Manual CUSTOM CODE ID The Code ID corresponding to each barcode type can be modified freely. The Code ID of all barcodes is 1 character and must be a letter, and cannot be set as a number, invisible character, or punctuation, etc. The Code ID of each barcode type can be modified independently, it needs to be used by reading the corresponding setting code and combining with the data code.
  • Page 31 User Manual 2D LED Barcode Scanner Modify ISBN Code ID Modify ISSN Code ID Modify GS1 DataBar Modify GS1 DataBar Code ID Limited Code ID Modify GS1 DataBar Expanded Code ID EXAMPLE Modify PDF417 Code ID to the letter ‘p’ 1 Look up the table and get the hexadecimal value corresponding to “p”...

  • Page 32: User-Defined Prefix

    2D LED Barcode Scanner User Manual USER-DEFINED PREFIX SEND USER-DEFINED PREFIX If the user has set a custom prefix, the scanner needs to be set to transmit the custom prefix to transmit the user-defined prefix information. The default is “Do not transmit custom prefixes”. Send user-defined prefix Do not transmit user-defined prefixes USER-DEFINED PREFIX SETTING...

  • Page 33: User-Defined Suffix

    User Manual 2D LED Barcode Scanner USER-DEFINED SUFFIX SEND USER-DEFINED SUFFIX If the user has set a custom suffix, the scanner needs to be set to transmit the custom suffix to transmit the user-defined suffix information. The default is “Do not transmit custom suffixes”. Send user-defined suffix Do not transmit user-defined suffixes USER-DEFINED SUFFIX SETTING...

  • Page 34: Hidden Characters

    2D LED Barcode Scanner User Manual HIDDEN CHARACTERS STEP 1: SET THE FIELD LENGTH Send user-defined suffix Do not transmit user-defined suffixes The length of the field is in bytes (1 byte for English characters and 2 bytes for Chinese characters), using hexadecimal data for configuration.

  • Page 35: End Character Setting

    User Manual 2D LED Barcode Scanner END CHARACTER SETTING The terminator suffix is used to mark the end of a complete data message. The terminator suffix must be the last content when a piece of data is sent, and there will be no additional data after that. Allow ending character No terminator is allowed Add CR...

  • Page 36: Barcode Parameter Setting

    2D LED Barcode Scanner User Manual BARCODE PARAMETER SETTING INTRODUCTION Each type of barcode has its own unique attributes, and the scanner can be adjusted to adapt to these attribute changes through the setting codes in this chapter. The fewer barcode types that enable “Allow Reading”, the faster the scanning speed of the scanner.

  • Page 37: Upc-A

    User Manual 2D LED Barcode Scanner UPC-A ALLOW/PROHIBIT READING UPC-A Allow reading UPC-A Prohibit reading UPC-A SEND CHECK CHARACTER The UPC-A barcode data is fixed to 12 characters, and the 12th digit is the check character, which is used to verify the correctness of all 12 characters. The default is to transmit the check character. Send check character Do not transmit check characters TRANSMISSION SYSTEM CHARACTERS...

  • Page 38: 2/5 Additional Bits

    2D LED Barcode Scanner User Manual 2/5 ADDITIONAL BITS Additional digits refer to the 2 or 5 digital barcodes appended to the normal barcode, as shown in the figure below. The blue line frame on the left is the normal barcode, and the red line frame on the right is the additional digit.

  • Page 39: Upc-E

    User Manual 2D LED Barcode Scanner UPC-E ALLOW/PROHIBIT READING UPC-E0 Allow reading UPC-E0 Prohibit reading UPC-E0 SEND CHECK CHARACTER UPC-E0 barcode data is fixed to 8 characters, the 8th digit is a check character, used to verify the correctness of all 8 characters, the default is to transmit a check character. Send check character Do not transmit check characters TRANSMISSION SYSTEM CHARACTERS...

  • Page 40: Send Check Character

    2D LED Barcode Scanner User Manual SEND CHECK CHARACTER UPC-E1 barcode data is fixed to 8 characters, and the 8th digit is a check character, which is used to verify the correctness of all 8 characters. The default is to transmit a check character. Send check character Do not transmit check characters TRANSMISSION SYSTEM CHARACTERS...

  • Page 41: Ean-8

    User Manual 2D LED Barcode Scanner EAN-8 ALLOW/PROHIBIT READING EAN-8 Allow reading EAN-8 Prohibit reading EAN-8 SEND CHECK CHARACTER The EAN-8 barcode data is fixed to 8 characters, and the 8th digit is the check character, which is used to verify the correctness of all 8 characters. The default is to transmit the check character. Send check character Do not transmit check characters 2/5 ADDITIONAL BITS...

  • Page 42: Ean-13

    2D LED Barcode Scanner User Manual EAN-13 ALLOW/PROHIBIT READING EAN-13 Allow reading EAN-13 Prohibit reading EAN-13 SEND CHECK CHARACTER The EAN-13 barcode data is fixed to 13 characters, and the 13th digit is the check character, which is used to verify the correctness of all 13 characters. The default is to transmit the check character. Send check character Do not transmit check characters 2/5 ADDITIONAL BITS...

  • Page 43: Convert To Isbn

    User Manual 2D LED Barcode Scanner CONVERT TO ISBN Barcode information conversion Barcode information is not converted CONVERT TO ISSN Barcode information conversion Barcode information is not converted CODE 128 ALLOW/PROHIBIT READING CODE 128 Allow reading Code 128 Prohibit reading Code 128 CODE 39 ALLOW/PROHIBIT READING CODE 39 Allow reading Code 39...

  • Page 44: Check Character Setting

    2D LED Barcode Scanner User Manual CHECK CHARACTER SETTING Code 39 barcode data is not mandatory to include a check character. If there is a check character, it is the last character of the data. The check character is a value calculated based on all data to check whether the data is correct.

  • Page 45: Code 32

    User Manual 2D LED Barcode Scanner CODE 32 ALLOW/PROHIBIT READING CODE 32 Code 32, Code 32 Pharmaceutical, is a form of Code 39 barcode used by Italian pharmacies. This bar code is also called PARAF. The output format of Code 32 is: The output format is: * + A + 8 digits + 1 digit check + *. Allow reading Code 32 Prohibit reading Code 32 Code 32 is converted from Code39 to Code32.

  • Page 46: Check Digit Setting

    2D LED Barcode Scanner User Manual CHECK DIGIT SETTING Modulo 10 verification and transmission verification Modulo 16 verification and transmission verification Modulo 10 verification and no verification Modulo 16 verification and no verification No verification START CHARACTER AND STOP CHARACTER SETTING Codabar start and end characters are allowed to be one of the four characters “A”, “B”, “C”, and “D”;...

  • Page 47: Interleaved 2 Of 5

    User Manual 2D LED Barcode Scanner INTERLEAVED 2 OF 5 ALLOW/PROHIBIT INTERLEAVED 2 OF 5 Allow to read Interleaved 2 of 5* Prohibit reading Interleaved 2 of 5 CHECK CHARACTER SETTING Interleaved 2 of 5 barcode data is not mandatory to include a check character. If there is a check character, it is the last character of the data.

  • Page 48: Matrix 2 Of 5

    2D LED Barcode Scanner User Manual MATRIX 2 OF 5 ALLOW/PROHIBIT MATRIX 2 OF 5 Allow to read Matrix 2 of 5 Prohibit reading Matrix 2 of 5* CHECK CHARACTER SETTING Matrix 2 of 5 barcode data is not mandatory to include a check character. If there is a check character, it must be the last byte of the data.

  • Page 49: Standard 2 Of 5 (Iata)

    User Manual 2D LED Barcode Scanner STANDARD 2 OF 5 (IATA) ALLOW/PROHIBIT STANDARD 2 OF 5 Allow to read Standard 2 of 5 Prohibit reading Standard 2 of 5 CHECK CHARACTER SETTING Standard 2 of 5 barcode data is not mandatory to include a check character. If there is a check character, it must be the last byte of the data.

  • Page 50: Qr Code

    2D LED Barcode Scanner User Manual QR CODE ALLOW/PROHIBIT QR CODE Allow to read QR Code Prohibit reading QR Code MICRO QR CODE ALLOW/PROHIBIT MICRO QR CODE Allow to read Micro QR Code Prohibit reading Micro QR Code DATA MATRIX ALLOW/PROHIBIT DATA MATRIX Allow to read Data Matrix Prohibit reading Data Matrix...

  • Page 51: Gs1 Databar 14

    User Manual 2D LED Barcode Scanner GS1 DATABAR 14 **Allow to read GS1 DataBar 14 Prohibit reading GS1 DataBar 14 GS1 DATABAR LIMITED **Allow to read GS1 DataBar Limited Prohibit reading RSS-Limited GS1 DATABAR EXPANDED **Allow to read GS1 DataBar Expanded Prohibit reading RSS-Expanded...

  • Page 52: Appendix

    2D LED Barcode Scanner User Manual APPENDIX APPENDIX-DATA CODE APPENDIX-DATA CODE After reading the data code, you must read the save code to save the read data. If an error occurs when reading the data code, you can cancel reading the wrong data in addition to resetting. For example, read a certain setting code and read the data “1”, “2”, and “3”...

  • Page 53: Appendix-Data Code

    User Manual 2D LED Barcode Scanner APPENDIX-DATA CODE DEFAULT SETTINGS PARAMETER REMARK SETTING Setting code function Send setting code All tones Power-on prompt Setup code prompt tone Prompt for successful reading Volume of prompt tone for successful barcode high reading Reading success indicator light Duration of the indicator light for successful barcode 200ms...
  • Page 54 2D LED Barcode Scanner User Manual DEFAULT SETTINGS PARAMETER REMARK SETTING Send Code ID Code ID prefix Code ID + Custom prefix Send custom prefix Send custom suffix Hide header data Hide central data Hide tail data Allow terminator Terminator Turn on all barcodes BARCODE PARAMETER...
  • Page 55 User Manual 2D LED Barcode Scanner DEFAULT SETTINGS PARAMETER REMARK SETTING Allow reading Turn on verification Transmission check Transmission start character and end character Recognize Full ASCII CODE 32 Allow reading Allow reading CODE 93 Turn on verification Transmission check Allow reading Turn on verification Transmission check...

  • Page 56: Appendix-Code Id

    2D LED Barcode Scanner User Manual APPENDIX-CODE ID BARCODE TYPE CODE ID UPC-A, UPC-E EAN-8, EAN-13,ISBN,ISSN CODE 39, Code 32 Codabar Code 128 Code 93 Interleaved 2 of 5 Matrix 2 of 5 Industrial 2 of 5 Standard 2 of 5 (IATA25) PDF 417 DataMatrix QR Code, Micro QR...
  • Page 57 User Manual 2D LED Barcode Scanner HEXADECIMAL ASCII VALUE CHARACTER (DECIMAL) SO (Shift Out) SI (Shift In) DLE (Data Link Escape) DC1 (XON) (Device Control 1) DC2 (Device Control 2) DC3 (XOFF) (Device Control 3) DC4 (Device Control 4) NAK (Negative Acknowledgment) SYN (Synchronous Idle) ETB (End of Trans.
  • Page 58 2D LED Barcode Scanner User Manual HEXADECIMAL ASCII VALUE CHARACTER (DECIMAL) : (Colon) ; (Semi-colon) < (Less Than) = (Equal Sign) > (Greater Than) ? (Question Mark) @ (AT Symbol) [ (Left / Opening Bracket)
  • Page 59 User Manual 2D LED Barcode Scanner HEXADECIMAL ASCII VALUE CHARACTER (DECIMAL) \ (Back Slash) ] (Right / Closing Bracket) ^ (Caret / Circumflex) _ (Underscore) ‘ (Grave Accent) { (Left/ Opening Brace) | (Vertical Bar) } (Right/Closing Brace) ~ (Tilde) DEL (Delete)
  • Page 60 2D LED Barcode Scanner User Manual...
  • Page 61 User Manual 2D LED Barcode Scanner...
  • Page 62 2D LED Barcode Scanner User Manual WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT (Applicable In The European Union And Other European Countries With Separate Collection Systems) ENGLISH: This symbol on the product or its packaging FRANÇAIS: Ce symbole sur Ie produit ou son emballage signifie que ce means that this product must not be treated as unsorted produit ne doit pas être traité...
  • Page 63 User Manual 2D LED Barcode Scanner REGULATORY STATEMENTS FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 64 All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Manhattan is a trademark of IC Intracom, registered in the U.S. and other countries. MH_153997_UM_0524_REV_6.01...

This manual is also suitable for:

153997

Table of Contents